deps: copy all openssl header files to include dir · nodejs/node@265d948
1-/* opensslconf.h */
2-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
3-4-#ifdef __cplusplus
5-extern "C" {
6-#endif
7-/* OpenSSL was configured with the following options: */
8-#ifndef OPENSSL_DOING_MAKEDEPEND
9-10-11-#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
12-# define OPENSSL_NO_EC_NISTP_64_GCC_128
13-#endif
14-#ifndef OPENSSL_NO_GMP
15-# define OPENSSL_NO_GMP
16-#endif
17-#ifndef OPENSSL_NO_JPAKE
18-# define OPENSSL_NO_JPAKE
19-#endif
20-#ifndef OPENSSL_NO_KRB5
21-# define OPENSSL_NO_KRB5
22-#endif
23-#ifndef OPENSSL_NO_LIBUNBOUND
24-# define OPENSSL_NO_LIBUNBOUND
25-#endif
26-#ifndef OPENSSL_NO_MD2
27-# define OPENSSL_NO_MD2
28-#endif
29-#ifndef OPENSSL_NO_RC5
30-# define OPENSSL_NO_RC5
31-#endif
32-#ifndef OPENSSL_NO_RFC3779
33-# define OPENSSL_NO_RFC3779
34-#endif
35-#ifndef OPENSSL_NO_SCTP
36-# define OPENSSL_NO_SCTP
37-#endif
38-#ifndef OPENSSL_NO_SSL_TRACE
39-# define OPENSSL_NO_SSL_TRACE
40-#endif
41-#ifndef OPENSSL_NO_SSL2
42-# define OPENSSL_NO_SSL2
43-#endif
44-#ifndef OPENSSL_NO_STORE
45-# define OPENSSL_NO_STORE
46-#endif
47-#ifndef OPENSSL_NO_UNIT_TEST
48-# define OPENSSL_NO_UNIT_TEST
49-#endif
50-#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS
51-# define OPENSSL_NO_WEAK_SSL_CIPHERS
52-#endif
53-54-#endif /* OPENSSL_DOING_MAKEDEPEND */
55-56-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
57-# define OPENSSL_NO_DYNAMIC_ENGINE
58-#endif
59-60-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
61- asks for it. This is a transient feature that is provided for those
62- who haven't had the time to do the appropriate changes in their
63- applications. */
64-#ifdef OPENSSL_ALGORITHM_DEFINES
65-# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
66-# define NO_EC_NISTP_64_GCC_128
67-# endif
68-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
69-# define NO_GMP
70-# endif
71-# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
72-# define NO_JPAKE
73-# endif
74-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
75-# define NO_KRB5
76-# endif
77-# if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND)
78-# define NO_LIBUNBOUND
79-# endif
80-# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
81-# define NO_MD2
82-# endif
83-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
84-# define NO_RC5
85-# endif
86-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
87-# define NO_RFC3779
88-# endif
89-# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
90-# define NO_SCTP
91-# endif
92-# if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE)
93-# define NO_SSL_TRACE
94-# endif
95-# if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
96-# define NO_SSL2
97-# endif
98-# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
99-# define NO_STORE
100-# endif
101-# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
102-# define NO_UNIT_TEST
103-# endif
104-# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS)
105-# define NO_WEAK_SSL_CIPHERS
106-# endif
107-#endif
108-109-/* crypto/opensslconf.h.in */
110-111-/* Generate 80386 code? */
112-#undef I386_ONLY
113-114-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
115-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
116-#define ENGINESDIR "/usr/local/ssl/lib/engines"
117-#define OPENSSLDIR "/usr/local/ssl"
118-#endif
119-#endif
120-121-#undef OPENSSL_UNISTD
122-#define OPENSSL_UNISTD <unistd.h>
123-124-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
125-126-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
127-#define IDEA_INT unsigned int
128-#endif
129-130-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
131-#define MD2_INT unsigned int
132-#endif
133-134-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
135-/* I need to put in a mod for the alpha - eay */
136-#define RC2_INT unsigned int
137-#endif
138-139-#if defined(HEADER_RC4_H)
140-#if !defined(RC4_INT)
141-/* using int types make the structure larger but make the code faster
142- * on most boxes I have tested - up to %20 faster. */
143-/*
144- * I don't know what does "most" mean, but declaring "int" is a must on:
145- * - Intel P6 because partial register stalls are very expensive;
146- * - elder Alpha because it lacks byte load/store instructions;
147- */
148-#define RC4_INT unsigned int
149-#endif
150-#if !defined(RC4_CHUNK)
151-/*
152- * This enables code handling data aligned at natural CPU word
153- * boundary. See crypto/rc4/rc4_enc.c for further details.
154- */
155-#undef RC4_CHUNK
156-#endif
157-#endif
158-159-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
160-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
161- * %20 speed up (longs are 8 bytes, int's are 4). */
162-#ifndef DES_LONG
163-#define DES_LONG unsigned long
164-#endif
165-#endif
166-167-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
168-#define CONFIG_HEADER_BN_H
169-#undef BN_LLONG
170-171-/* Should we define BN_DIV2W here? */
172-173-/* Only one for the following should be defined */
174-#undef SIXTY_FOUR_BIT_LONG
175-#undef SIXTY_FOUR_BIT
176-#define THIRTY_TWO_BIT
177-#endif
178-179-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
180-#define CONFIG_HEADER_RC4_LOCL_H
181-/* if this is defined data[i] is used instead of *data, this is a %20
182- * speedup on x86 */
183-#undef RC4_INDEX
184-#endif
185-186-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
187-#define CONFIG_HEADER_BF_LOCL_H
188-#undef BF_PTR
189-#endif /* HEADER_BF_LOCL_H */
190-191-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
192-#define CONFIG_HEADER_DES_LOCL_H
193-#ifndef DES_DEFAULT_OPTIONS
194-/* the following is tweaked from a config script, that is why it is a
195- * protected undef/define */
196-#ifndef DES_PTR
197-#undef DES_PTR
198-#endif
199-200-/* This helps C compiler generate the correct code for multiple functional
201- * units. It reduces register dependancies at the expense of 2 more
202- * registers */
203-#ifndef DES_RISC1
204-#undef DES_RISC1
205-#endif
206-207-#ifndef DES_RISC2
208-#undef DES_RISC2
209-#endif
210-211-#if defined(DES_RISC1) && defined(DES_RISC2)
212-#error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
213-#endif
214-215-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
216- * Very mucy CPU dependant */
217-#ifndef DES_UNROLL
218-#undef DES_UNROLL
219-#endif
220-221-/* These default values were supplied by
222- * Peter Gutman <pgut001@cs.auckland.ac.nz>
223- * They are only used if nothing else has been defined */
224-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
225-/* Special defines which change the way the code is built depending on the
226- CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
227- even newer MIPS CPU's, but at the moment one size fits all for
228- optimization options. Older Sparc's work better with only UNROLL, but
229- there's no way to tell at compile time what it is you're running on */
230-231-#if defined( __sun ) || defined ( sun ) /* Newer Sparc's */
232-# define DES_PTR
233-# define DES_RISC1
234-# define DES_UNROLL
235-#elif defined( __ultrix ) /* Older MIPS */
236-# define DES_PTR
237-# define DES_RISC2
238-# define DES_UNROLL
239-#elif defined( __osf1__ ) /* Alpha */
240-# define DES_PTR
241-# define DES_RISC2
242-#elif defined ( _AIX ) /* RS6000 */
243-/* Unknown */
244-#elif defined( __hpux ) /* HP-PA */
245-/* Unknown */
246-#elif defined( __aux ) /* 68K */
247-/* Unknown */
248-#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */
249-# define DES_UNROLL
250-#elif defined( __sgi ) /* Newer MIPS */
251-# define DES_PTR
252-# define DES_RISC2
253-# define DES_UNROLL
254-#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */
255-# define DES_PTR
256-# define DES_RISC1
257-# define DES_UNROLL
258-#endif /* Systems-specific speed defines */
259-#endif
260-261-#endif /* DES_DEFAULT_OPTIONS */
262-#endif /* HEADER_DES_LOCL_H */
263-#ifdef __cplusplus
264-}
265-#endif
1+#include "../../config/opensslconf.h"