objdump: long run time when using -D -z
Alan Modra
amodra@gmail.com
Fri May 1 05:58:11 GMT 2020
More information about the Binutils mailing list
Fri May 1 05:58:11 GMT 2020
- Previous message (by thread): PR25882, .gnu.attributes are not checked for shared libraries
- Next message (by thread): PR25900, RISC-V: null pointer dereference
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
The zero scan is silly when the result isn't used.
* objdump.c (disassemble_bytes): Don't scan for zeros when
disassembling zeros. Translate "resuming at file offset" message.
Formatting. Replace some signed variables with unsigned.
diff --git a/binutils/objdump.c b/binutils/objdump.c
index 1d9afec992..99e6df6eb1 100644
--- a/binutils/objdump.c
+++ b/binutils/objdump.c
@@ -2555,13 +2555,13 @@ disassemble_bytes (struct disassemble_info * inf,
{
struct objdump_disasm_info *aux;
asection *section;
- int octets_per_line;
- int skip_addr_chars;
+ unsigned int octets_per_line;
+ unsigned int skip_addr_chars;
bfd_vma addr_offset;
unsigned int opb = inf->octets_per_byte;
unsigned int skip_zeroes = inf->skip_zeroes;
unsigned int skip_zeroes_at_end = inf->skip_zeroes_at_end;
- int octets = opb;
+ size_t octets;
SFILE sfile;
aux = (struct objdump_disasm_info *) inf->application_data;
@@ -2630,7 +2630,6 @@ disassemble_bytes (struct disassemble_info * inf,
addr_offset = start_offset;
while (addr_offset < stop_offset)
{
- bfd_vma z;
bfd_boolean need_nl = FALSE;
octets = 0;
@@ -2640,41 +2639,42 @@ disassemble_bytes (struct disassemble_info * inf,
/* If we see more than SKIP_ZEROES octets of zeroes, we just
print `...'. */
- for (z = addr_offset * opb; z < stop_offset * opb; z++)
- if (data[z] != 0)
- break;
+ if (! disassemble_zeroes)
+ for (; addr_offset * opb + octets < stop_offset * opb; octets++)
+ if (data[addr_offset * opb + octets] != 0)
+ break;
if (! disassemble_zeroes
&& (inf->insn_info_valid == 0
|| inf->branch_delay_insns == 0)
- && (z - addr_offset * opb >= skip_zeroes
- || (z == stop_offset * opb &&
- z - addr_offset * opb < skip_zeroes_at_end)))
+ && (octets >= skip_zeroes
+ || (addr_offset * opb + octets == stop_offset * opb
+ && octets < skip_zeroes_at_end)))
{
/* If there are more nonzero octets to follow, we only skip
zeroes in multiples of 4, to try to avoid running over
the start of an instruction which happens to start with
zero. */
- if (z != stop_offset * opb)
- z = addr_offset * opb + ((z - addr_offset * opb) &~ 3);
-
- octets = z - addr_offset * opb;
+ if (addr_offset * opb + octets != stop_offset * opb)
+ octets &= ~3;
/* If we are going to display more data, and we are displaying
file offsets, then tell the user how many zeroes we skip
and the file offset from where we resume dumping. */
- if (display_file_offsets && ((addr_offset + (octets / opb)) < stop_offset))
- printf ("\t... (skipping %d zeroes, resuming at file offset: 0x%lx)\n",
- octets / opb,
+ if (display_file_offsets
+ && addr_offset + octets / opb < stop_offset)
+ printf (_("\t... (skipping %lu zeroes, "
+ "resuming at file offset: 0x%lx)\n"),
+ (unsigned long) (octets / opb),
(unsigned long) (section->filepos
- + (addr_offset + (octets / opb))));
+ + addr_offset + octets / opb));
else
printf ("\t...\n");
}
else
{
char buf[50];
- int bpc = 0;
- int pb = 0;
+ unsigned int bpc = 0;
+ unsigned int pb = 0;
if (with_line_numbers || with_source_code)
show_line (aux->abfd, section, addr_offset);
@@ -2706,6 +2706,8 @@ disassemble_bytes (struct disassemble_info * inf,
if (insns)
{
+ int insn_size;
+
sfile.pos = 0;
inf->fprintf_func = (fprintf_ftype) objdump_sprintf;
inf->stream = &sfile;
@@ -2722,13 +2724,13 @@ disassemble_bytes (struct disassemble_info * inf,
&& *relppp < relppend)
{
bfd_signed_vma distance_to_rel;
- int insn_size = 0;
int max_reloc_offset
= aux->abfd->arch_info->max_reloc_offset_into_insn;
distance_to_rel = ((**relppp)->address - rel_offset
- addr_offset);
+ insn_size = 0;
if (distance_to_rel > 0
&& (max_reloc_offset < 0
|| distance_to_rel <= max_reloc_offset))
@@ -2769,8 +2771,8 @@ disassemble_bytes (struct disassemble_info * inf,
}
if (! disassemble_all
- && (section->flags & (SEC_CODE | SEC_HAS_CONTENTS))
- == (SEC_CODE | SEC_HAS_CONTENTS))
+ && ((section->flags & (SEC_CODE | SEC_HAS_CONTENTS))
+ == (SEC_CODE | SEC_HAS_CONTENTS)))
/* Set a stop_vma so that the disassembler will not read
beyond the next symbol. We assume that symbols appear on
the boundaries between instructions. We only do this when
@@ -2778,21 +2780,22 @@ disassemble_bytes (struct disassemble_info * inf,
inf->stop_vma = section->vma + stop_offset;
inf->stop_offset = stop_offset;
- octets = (*disassemble_fn) (section->vma + addr_offset, inf);
+ insn_size = (*disassemble_fn) (section->vma + addr_offset, inf);
+ octets = insn_size;
inf->stop_vma = 0;
inf->fprintf_func = (fprintf_ftype) fprintf;
inf->stream = stdout;
if (insn_width == 0 && inf->bytes_per_line != 0)
octets_per_line = inf->bytes_per_line;
- if (octets < (int) opb)
+ if (insn_size < (int) opb)
{
if (sfile.pos)
printf ("%s\n", sfile.buffer);
- if (octets >= 0)
+ if (insn_size >= 0)
{
non_fatal (_("disassemble_fn returned length %d"),
- octets);
+ insn_size);
exit_status = 1;
}
break;
@@ -2838,11 +2841,11 @@ disassemble_bytes (struct disassemble_info * inf,
/* PR 21580: Check for a buffer ending early. */
if (j + bpc <= stop_offset * opb)
{
- int k;
+ unsigned int k;
if (inf->display_endian == BFD_ENDIAN_LITTLE)
{
- for (k = bpc - 1; k >= 0; k--)
+ for (k = bpc; k-- != 0; )
printf ("%02x", (unsigned) data[j + k]);
}
else
@@ -2856,7 +2859,7 @@ disassemble_bytes (struct disassemble_info * inf,
for (; pb < octets_per_line; pb += bpc)
{
- int k;
+ unsigned int k;
for (k = 0; k < bpc; k++)
printf (" ");
@@ -2911,11 +2914,11 @@ disassemble_bytes (struct disassemble_info * inf,
/* PR 21619: Check for a buffer ending early. */
if (j + bpc <= stop_offset * opb)
{
- int k;
+ unsigned int k;
if (inf->display_endian == BFD_ENDIAN_LITTLE)
{
- for (k = bpc - 1; k >= 0; k--)
+ for (k = bpc; k-- != 0; )
printf ("%02x", (unsigned) data[j + k]);
}
else
--
Alan Modra
Australia Development Lab, IBM
- Previous message (by thread): PR25882, .gnu.attributes are not checked for shared libraries
- Next message (by thread): PR25900, RISC-V: null pointer dereference
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Binutils mailing list