Messages (35) msg131781 - (view) Author: (RonnyPfannschmidt) Date: 2011-03-22 21:18

i passed in a unicode value as version by accident,
resulted in:

Traceback (most recent call last):
  File "/home/ronny/.local/venvs/clean/bin/pysetup", line 7, in <module>
    execfile(__file__)
  File "/home/ronny/Projects/distutils2/distutils2/pysetup", line 5, in <module>
    main()
  File "/home/ronny/Projects/distutils2/distutils2/run.py", line 486, in main
    return dispatcher()
  File "/home/ronny/Projects/distutils2/distutils2/run.py", line 477, in __call__
    return func(self, self.args)
  File "/home/ronny/Projects/distutils2/distutils2/run.py", line 166, in _run
    dist.run_command(cmd, dispatcher.command_options[cmd])
  File "/home/ronny/Projects/distutils2/distutils2/dist.py", line 781, in run_command
    cmd_obj.run()
  File "/home/ronny/Projects/distutils2/distutils2/command/sdist.py", line 183, in run
    self.make_distribution()
  File "/home/ronny/Projects/distutils2/distutils2/command/sdist.py", line 327, in make_distribution
    owner=self.owner, group=self.group)
  File "/home/ronny/Projects/distutils2/distutils2/command/cmd.py", line 426, in make_archive
    owner=owner, group=group)
  File "/home/ronny/Projects/distutils2/distutils2/_backport/shutil.py", line 588, in make_archive
    filename = func(base_name, base_dir, **kwargs)
  File "/home/ronny/Projects/distutils2/distutils2/_backport/shutil.py", line 426, in _make_tarball
    tar = tarfile.open(archive_name, 'w|%s' % tar_compression[compress])
  File "/home/ronny/Projects/distutils2/distutils2/_backport/tarfile.py", line 1693, in open
    _Stream(name, filemode, comptype, fileobj, bufsize),
  File "/home/ronny/Projects/distutils2/distutils2/_backport/tarfile.py", line 434, in __init__
    self._init_write_gz()
  File "/home/ronny/Projects/distutils2/distutils2/_backport/tarfile.py", line 462, in _init_write_gz
    self.__write(self.name + NUL)
  File "/home/ronny/Projects/distutils2/distutils2/_backport/tarfile.py", line 478, in __write
    self.buf += s
UnicodeDecodeError: 'ascii' codec can't decode byte 0x8b in position 1: ordinal not in range(128)


note that i have no idea where the 0x8b is from, if i just pass the version trough str it works (which means something is wrong somewhere else, unicode just triggers it)

msg131782 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-03-22 21:20

What is the version?  Can you also include the setup.cfg file?

msg131785 - (view) Author: (RonnyPfannschmidt) Date: 2011-03-22 21:23

here the file that passed in the unicode string via hook
note that all of the passed characters are actually ascii

msg131786 - (view) Author: (RonnyPfannschmidt) Date: 2011-03-22 21:26

actually its enough to have the version_hook set the version to u'0.0'

msg137977 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-06-09 14:46

Python 3.3 works with unicode ;), so we’ll try reproducing this later, when we have the 2.x backport.

msg144943 - (view) Author: Jens Diemer (jens) Date: 2011-10-05 10:13

I have the same problem, using distutils (and not distutils2):


Traceback (most recent call last):
  File "./setup.py", line 60, in <module>
    test_suite="creole.tests.run_all_tests",
  File "/usr/lib/python2.7/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
    self.run_command(cmd)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/home/jens/python2creole_env/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/sdist.py", line 147, in run
  File "/usr/lib/python2.7/distutils/command/sdist.py", line 448, in make_distribution
    owner=self.owner, group=self.group)
  File "/usr/lib/python2.7/distutils/cmd.py", line 392, in make_archive
    owner=owner, group=group)
  File "/usr/lib/python2.7/distutils/archive_util.py", line 237, in make_archive
    filename = func(base_name, base_dir, **kwargs)
  File "/usr/lib/python2.7/distutils/archive_util.py", line 101, in make_tarball
    tar = tarfile.open(archive_name, 'w|%s' % tar_compression[compress])
  File "/usr/lib/python2.7/tarfile.py", line 1687, in open
    _Stream(name, filemode, comptype, fileobj, bufsize),
  File "/usr/lib/python2.7/tarfile.py", line 431, in __init__
    self._init_write_gz()
  File "/usr/lib/python2.7/tarfile.py", line 459, in _init_write_gz
    self.__write(self.name + NUL)
  File "/usr/lib/python2.7/tarfile.py", line 475, in __write
    self.buf += s
UnicodeDecodeError: 'ascii' codec can't decode byte 0x8b in position 1: ordinal not in range(128)


The Problem seems that tarfile._Stream() can't handle 'name' as unicode. With this changes, it works:

class _Stream:
    ...
    def __init__(self, name, mode, comptype, fileobj, bufsize):
        ...
        self.name = str(name) or ""
                    ++++    +

Don't know it this is related to the usage of: from __future__ import unicode_literals ?

msg145214 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-10-09 04:55

Does someone want to write a test for this?  We have examples of creating tarball sdists in Lib/distutils/tests/test_sdist.py, one would just need to copy one example and use a version with a unicode version.

msg145694 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-10-17 13:48

I can’t reproduce with pysetup or distutils 3.x.

msg145695 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-10-17 13:49

Jens:
> Don't know it this is related to the usage of: from __future__ import
> unicode_literals ?
Yes.  This semi-magic import will turn your string literals into unicode literals, hence your name, version, etc. will be unicode objects.  It’s the same thing as writing version=u'1.0'.

msg145770 - (view) Author: David Barnett (mu_mind) Date: 2011-10-18 02:41

I'm getting this exact error when I run "python setup.py sdist", no matter what I do. Even if I just create a new project, type "1.0.0" for version, type "a" in all the other fields, and say "no" to every question; then run "pysetup generate-setup" and "python setup.py sdist".

msg145831 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-10-18 16:15

David:
I don’t think packaging and pysetup generate-setup have anything to do with this bug.  You can create a setup.py file manually and see the error with distutils in 2.7.

As I said before, I agree this is a bug.  I’m working on many things right now, so if someone volunteers to write a test and possibly a fix for this, it would help.  We have examples of creating tarball sdists in Lib/distutils/tests/test_sdist.py, one would just need to copy an example and pass version=u'1.0'.

msg146623 - (view) Author: David Barnett (mu_mind) Date: 2011-10-29 23:47

Here's a test for the bug.

msg146624 - (view) Author: David Barnett (mu_mind) Date: 2011-10-30 00:04

One way to fix the symptom (maybe not the correct way) would be to edit tarfile._Stream._init_write_gz and change the line that reads
  self.__write(self.name + NUL)
to something like
  self.__write(self.name.encode('utf-8') + NUL)

tarfile is building up an encoded stream of bytes, and whatever self.name is it needs to be encoded before being inserted into the stream. I'm not positive UTF-8 is right, and maybe it should only convert if isinstance(self.name, unicode).

msg146706 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-10-31 16:22

> Here's a test for the bug.
Thanks!  Some comments are strange, but the patch is a good start.

> One way to fix the symptom (maybe not the correct way) would be to edit
> tarfile._Stream._init_write_gz
I’d rather change distutils, not tarfile.  I think the best place to encode it may be in the cmd module (see the make_archive method).

> I'm not positive UTF-8 is right
It is.

> and maybe it should only convert if isinstance(self.name, unicode).
Indeed.

msg147429 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-11-11 11:57

First, the term 'gztar' doesn't appear in this ticket, and since the issue only applies when sdist --format gztar, I mention that here.

Also, issue8396 suggests encoding using sys.getfilesystemencoding().

msg147510 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-11-12 16:34

> since the issue only applies when sdist --format gztar, I mention that here.
bztar will probably have the same issue.

> Also, issue8396 suggests encoding using sys.getfilesystemencoding().
Good one!

msg149878 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-19 17:27

This error is also encountered if the package name is unicode. The error can be simply reproduced with this command:

python -c "from setuptools import setup; setup(name=u'foo')" sdist --formats gztar

The error also occurs with the bdist command, and probably others.

msg149879 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-19 17:30

I meant to paste the repro with distutils.core:

python -c "from distutils.core import setup; setup(name=u'foo')" sdist --formats gztar

msg149897 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-20 01:28

I believe the underlying cause of this issue is #13639.

msg149899 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-20 01:41

I've created a repo to continue this work. I've integrated David's patch (thanks).

It's not obvious to me what the encoding should be. Python and the tarfile module can accept unicode filenames. It seems that only the gzip part of tarfile fails if a unicode name is passed. Encoding to 'utf-8' or the default file system encoding doesn't seem right (as the characters end up getting stored in the gzip archive itself). Additionally, encoding as 'utf-8' would cause the file to be created with a utf-8 filename, which would be undesirable.

So in the current repo, I've created a check to convert the filename to ASCII. If it can be converted to ASCII, it is converted and passed through to tarfile. This should address the majority of users who have thus encountered this issue. For those who wish to use non-ascii characters in project names or versions, one will have to use Python 3 or wait until #13639 is fixed.

Please review the enclosed patch.

Since one test fails (and is known to fail), should it omitted? Can it remain but be marked as "expected to fail"?

msg149969 - (view) Author: Lars Gustäbel (lars.gustaebel) * Date: 2011-12-21 09:15

Is there a good reason why the tarfile mode that is used is "w|gz"? It seems to me that this is not necessary, "w:gz" should be enough. "w|gz" is for special operations only (see the tarfile docs).

msg150019 - (view) Author: Éric Araujo (eric.araujo) * Date: 2011-12-21 17:10

Lars: I will check the history to see if there is a reason (there is probably none) and apply your patch, thank you.

Jason: Thanks for the input.

> It's not obvious to me what the encoding should be. Python and the tarfile module can
> accept unicode filenames.
Note that distutils2 supports back to 2.4, which may not be as convenient.

> It seems that only the gzip part of tarfile fails if a unicode name is passed.
OK.

> Encoding to 'utf-8' or the default file system encoding doesn't seem right (as the
> characters end up getting stored in the gzip archive itself).
I don’t understand.

> Additionally, encoding as 'utf-8' would cause the file to be created with a utf-8 filename,
> which would be undesirable.
Why?

> So in the current repo, I've created a check to convert the filename to ASCII. If it can be
> converted to ASCII, it is converted and passed through to tarfile. This should address the
> majority of users who have thus encountered this issue. For those who wish to use non-ascii
> characters in project names or versions, one will have to use Python 3 or wait until #13639
> is fixed.
The problem is that even in the latest PEP (345), the characters allowed in a project name are under-specified.  I don’t know if restricting to ASCII-only is acceptable.

> Please review the enclosed patch.
I will.

> Since one test fails (and is known to fail), should it omitted? Can it remain but be marked as
> "expected to fail"?
Is it the test with non-ASCII characters?  If there’s hope to fix it later, you can include it and mark it @unittest.expectedFailure.

msg150024 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-21 17:35

> > Encoding to 'utf-8' or the default file system encoding doesn't seem
> > right (as the characters end up getting stored in the gzip archive itself).
> I don’t understand.

The characters are being stored in the gzip archive as part of the gzip header. The comment in the Python 3 trunk indicates the encoding should be iso-8859-1: https://bitbucket.org/mirror/cpython/src/f3041e7f535d/Lib/tarfile.py#cl-475

My point is that the file system encoding is not relevant here. Because the name is being stored in a gzip blob, it should be encoded according to gzip specs.

> > Additionally, encoding as 'utf-8' would cause the file to be created
> > with a utf-8 filename, which would be undesirable.
> Why?

My concern here was that if we're encoding the string as utf-8 before passing to the __builtins__.open() call, Python might encode _that_ utf-8 string using the file system encoding and save the file that way (where the file is named with a utf-8 encoded string, not the unicode string intended). After further investigation, and based on the work that's been proposed, this is not a risk.

msg150029 - (view) Author: Lars Gustäbel (lars.gustaebel) * Date: 2011-12-21 18:19

Just for the record:

The gzip format (defined in RFC 1952) allows storing the original filename (without the .gz suffix) in an additional field in the header (the FNAME field). Latin-1 (iso-8859-1) is required. It is ironic that this causes so much trouble, because it is never used. A gzip file without that field is prefectly valid. The gzip program for example stores the original filename by default but does not use it when decompressing unless it is explicitly told to do so with the -N/--name option. If no FNAME field is present in a gzipped file the gzip program just falls back on stripping the .gz suffix.

msg150253 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-26 05:39

Thanks to Lars for suggesting the fix, replacing 'w|gz' with 'w:gz'. I attempted this change in the latest revision of my fork (774933cf7775.diff). While this change does address the issue if a unicode string is passed which can be encoded using the default encoding. However, if a latin-1 string is passed or another multi-byte unicode character is passed, a UnicodeDecodeError still occurs (though now in gzip.py). Here's the test results and tracebacks:

PS C:\Users\jaraco\projects\public\cpython> python .\lib\distutils\tests\test_archive_util.py
test_check_archive_formats (__main__.ArchiveUtilTestCase) ... ok
test_compress_deprecated (__main__.ArchiveUtilTestCase) ... skipped 'The compress program is required'
test_make_archive (__main__.ArchiveUtilTestCase) ... ok
test_make_archive_cwd (__main__.ArchiveUtilTestCase) ... ok
test_make_archive_owner_group (__main__.ArchiveUtilTestCase) ... ok
test_make_tarball (__main__.ArchiveUtilTestCase) ... ok
test_make_tarball_unicode (__main__.ArchiveUtilTestCase) ... ok
test_make_tarball_unicode_extended (__main__.ArchiveUtilTestCase) ... ERROR
test_make_tarball_unicode_latin1 (__main__.ArchiveUtilTestCase) ... ERROR
test_make_zipfile (__main__.ArchiveUtilTestCase) ... ok
test_tarfile_root_owner (__main__.ArchiveUtilTestCase) ... skipped 'Requires grp and pwd support'
test_tarfile_vs_tar (__main__.ArchiveUtilTestCase) ... skipped 'Need the tar command to run'

======================================================================
ERROR: test_make_tarball_unicode_extended (__main__.ArchiveUtilTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
  File ".\lib\distutils\tests\test_archive_util.py", line 305, in test_make_tarball_unicode_extended
    self._make_tarball(u'のアーカイブ') # japanese for archive
  File ".\lib\distutils\tests\test_archive_util.py", line 64, in _make_tarball
    make_tarball(splitdrive(base_name)[1], '.')
  File "C:\Users\jaraco\projects\public\cpython\Lib\distutils\archive_util.py",
line 101, in make_tarball
    tar = tarfile.open(archive_name, 'w:%s' % tar_compression[compress])
  File "C:\Users\jaraco\projects\public\cpython\Lib\tarfile.py", line 1676, in open
    return func(name, filemode, fileobj, **kwargs)
  File "C:\Users\jaraco\projects\public\cpython\Lib\tarfile.py", line 1724, in gzopen
    gzip.GzipFile(name, mode, compresslevel, fileobj),
  File "C:\Users\jaraco\projects\public\cpython\Lib\gzip.py", line 127, in __init__
    self._write_gzip_header()
  File "C:\Users\jaraco\projects\public\cpython\Lib\gzip.py", line 172, in _write_gzip_header
    self.fileobj.write(fname + '\000')
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-5: ordinal not in range(128)

======================================================================
ERROR: test_make_tarball_unicode_latin1 (__main__.ArchiveUtilTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
  File ".\lib\distutils\tests\test_archive_util.py", line 297, in test_make_tarball_unicode_latin1
    self._make_tarball(u'årchiv') # note this isn't a real word
  File ".\lib\distutils\tests\test_archive_util.py", line 64, in _make_tarball
    make_tarball(splitdrive(base_name)[1], '.')
  File "C:\Users\jaraco\projects\public\cpython\Lib\distutils\archive_util.py",
line 101, in make_tarball
    tar = tarfile.open(archive_name, 'w:%s' % tar_compression[compress])
  File "C:\Users\jaraco\projects\public\cpython\Lib\tarfile.py", line 1676, in open
    return func(name, filemode, fileobj, **kwargs)
  File "C:\Users\jaraco\projects\public\cpython\Lib\tarfile.py", line 1724, in gzopen
    gzip.GzipFile(name, mode, compresslevel, fileobj),
  File "C:\Users\jaraco\projects\public\cpython\Lib\gzip.py", line 127, in __init__
    self._write_gzip_header()
  File "C:\Users\jaraco\projects\public\cpython\Lib\gzip.py", line 172, in _write_gzip_header
    self.fileobj.write(fname + '\000')
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe5' in position 0:
ordinal not in range(128)

----------------------------------------------------------------------
Ran 12 tests in 0.058s

FAILED (errors=2, skipped=3)
Traceback (most recent call last):
  File ".\lib\distutils\tests\test_archive_util.py", line 311, in <module>
    run_unittest(test_suite())
  File "C:\Users\jaraco\projects\public\cpython\Lib\test\test_support.py", line
1094, in run_unittest
    _run_suite(suite)
  File "C:\Users\jaraco\projects\public\cpython\Lib\test\test_support.py", line
1077, in _run_suite
    raise TestFailed(err)
test.test_support.TestFailed: multiple errors occurred

msg150266 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-26 16:03

I've captured the cause of the UnicodeEncodeErrors as #13664.

After rebasing the changes to include the fix for #13639, I found that the tests were still failing until I also reverted the patch to call tarfile.open with 'w:gz'. Now all the new tests pass (with no other changes to the code).

This latest patch only contains tests to capture the errors encountered. I plan to push this changeset and also port the test changes the default (Python 3.3) branch.

msg150267 - (view) Author: Roundup Robot (python-dev) Date: 2011-12-26 17:22

New changeset dc1045d08bd8 by Jason R. Coombs in branch '2.7':
Issue #11638: Adding test to ensure .tar.gz files can be generated by sdist command with unicode metadata, based on David Barnett's patch.
http://hg.python.org/cpython/rev/dc1045d08bd8

msg150269 - (view) Author: Roundup Robot (python-dev) Date: 2011-12-26 17:22

New changeset f0fcb82a88e9 by Jason R. Coombs in branch 'default':
Ported some test cases from 2.7 for #11638
http://hg.python.org/cpython/rev/f0fcb82a88e9

msg150270 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-26 17:30

Since the tests now pass, and the only changes were to the tests, I've pushed them to the master. And with that I'm marking this ticket as closed.

msg150274 - (view) Author: Benjamin Peterson (benjamin.peterson) * Date: 2011-12-27 21:20

f0fcb82a88e9 broke bots. See http://www.python.org/dev/buildbot/all/builders/x86%20Gentoo%203.x/builds/1374/steps/test/logs/stdio

msg150277 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-28 02:04

> That's a shame. I tested it in advance. I'll correct or revert tonight or tomorrow.

msg150293 - (view) Author: Roundup Robot (python-dev) Date: 2011-12-28 15:45

New changeset a7744f778646 by Jason R. Coombs in branch 'default':
Limit test scope to those platforms that can save the target filenames. Reference #11638.
http://hg.python.org/cpython/rev/a7744f778646

msg150294 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-28 15:48

I've limited the scope of the patch to attempt to only test on those platforms that can actually create unicode-named files. I'll watch the buildbots to see if that corrects the failures (since I don't have the failing platforms available to me).

msg150300 - (view) Author: Roundup Robot (python-dev) Date: 2011-12-28 16:42

New changeset 9b681e0c04ed by Jason R. Coombs in branch '2.7':
Limit test scope to those platforms that can save the target filenames. Reference #11638.
http://hg.python.org/cpython/rev/9b681e0c04ed

msg150301 - (view) Author: Jason R. Coombs (jaraco) * Date: 2011-12-28 16:44

The changes to the default branch seem to have cleaned up the test failures on most platforms (still waiting on the ARM results). So I've backported the test skips to the Python 2.7 branch as well.

History Date User Action Args 2022-04-11 14:57:15adminsetgithub: 55847 2014-12-28 19:46:44berker.peksagsetresolution: fixed
stage: needs patch -> resolved 2013-09-25 20:10:00doughellmannsetnosy: + doughellmann
2011-12-28 16:44:24jaracosetmessages: + msg150301 2011-12-28 16:42:39python-devsetmessages: + msg150300 2011-12-28 15:48:46jaracosetmessages: + msg150294 2011-12-28 15:45:53python-devsetmessages: + msg150293 2011-12-28 02:04:36jaracosetfiles: + smime.p7m

messages: + msg150277
title: python setup.py sdist --formats tar* crashes if version is unicode -> python setup.py sdist --formats tar* crashes if version is unicode

2011-12-27 21:20:24benjamin.petersonsetnosy: + benjamin.peterson
messages: + msg150274
2011-12-26 17:30:29jaracosetstatus: open -> closed

messages: + msg150270

2011-12-26 17:22:50python-devsetmessages: + msg150269 2011-12-26 17:22:36python-devsetnosy: + python-dev
messages: + msg150267
2011-12-26 16:03:23jaracosetfiles: + dc1045d08bd8.diff 2011-12-26 16:03:00jaracosetmessages: + msg150266 2011-12-26 05:39:29jaracosetmessages: + msg150253 2011-12-26 05:28:36jaracosetfiles: + 774933cf7775.diff
keywords: + patch 2011-12-21 18:19:40lars.gustaebelsetmessages: + msg150029 2011-12-21 17:35:48jaracosetmessages: + msg150024 2011-12-21 17:10:44eric.araujosetkeywords: - patch, easy
nosy: + vstinner
messages: + msg150019 2011-12-21 09:15:05lars.gustaebelsetfiles: + distutils_tarfile_fix.diff
nosy: + lars.gustaebel
messages: + msg149969 2011-12-20 01:43:05jaracosetfiles: + 9e9ea96eb0dd.diff 2011-12-20 01:41:38jaracosethgrepos: + hgrepo96
messages: + msg149899 2011-12-20 01:28:52jaracosetmessages: + msg149897 2011-12-19 17:30:11jaracosetmessages: + msg149879 2011-12-19 17:27:22jaracosetmessages: + msg149878 2011-11-12 16:34:48eric.araujosetmessages: + msg147510
title: python setup.py sdist crashes if version is unicode -> python setup.py sdist --formats tar* crashes if version is unicode 2011-11-11 11:57:35jaracosetnosy: + jaraco
messages: + msg147429
2011-10-31 16:22:46eric.araujosetmessages: + msg146706 2011-10-30 00:04:40mu_mindsetmessages: + msg146624 2011-10-29 23:47:36mu_mindsetfiles: + test_unicode_sdist.patch
keywords: + patch
messages: + msg146623
2011-10-18 16:15:52eric.araujosetmessages: + msg145831 2011-10-18 02:41:57mu_mindsetnosy: + mu_mind
messages: + msg145770
2011-10-17 13:49:13eric.araujosetmessages: + msg145695 2011-10-17 13:48:00eric.araujosettitle: pysetup un sdist crashes with weird trace if version is unicode by accident -> python setup.py sdist crashes if version is unicode
messages: + msg145694
components: - Distutils2
versions: - 3rd party, Python 3.2, Python 3.3 2011-10-17 06:19:11mikehoysetnosy: + mikehoy
2011-10-09 04:55:44eric.araujosetkeywords: + easy
resolution: remind -> (no value)
messages: + msg145214

versions: + Python 2.7, Python 3.2, Python 3.3

2011-10-05 10:13:25jenssetmessages: + msg144943
components: + Distutils 2011-10-05 10:00:56jenssetnosy: + jens
2011-06-09 14:46:33eric.araujosetresolution: remind
messages: + msg137977

assignee: tarek -> eric.araujo
type: behavior
stage: needs patch

2011-03-22 21:28:12RonnyPfannschmidtsetfiles: + hgdistver.py
nosy: tarek, eric.araujo, RonnyPfannschmidt, alexis 2011-03-22 21:26:07RonnyPfannschmidtsetnosy: tarek, eric.araujo, RonnyPfannschmidt, alexis
messages: + msg131786 2011-03-22 21:24:11RonnyPfannschmidtsetfiles: + setup.cfg
nosy: tarek, eric.araujo, RonnyPfannschmidt, alexis 2011-03-22 21:23:23RonnyPfannschmidtsetfiles: + hgdistver.py
nosy: tarek, eric.araujo, RonnyPfannschmidt, alexis
messages: + msg131785
2011-03-22 21:20:26eric.araujosetnosy: tarek, eric.araujo, RonnyPfannschmidt, alexis
messages: + msg131782 2011-03-22 21:18:52RonnyPfannschmidtcreate