Constructor Detail

• Clock

  protected Clock()

  Constructor accessible by subclasses.

Method Detail

• systemUTC

  public static Clock systemUTC()

  Obtains a clock that returns the current instant using the best available system clock, converting to date and time using the UTC time-zone.

  This clock, rather than systemDefaultZone(), should be used when you need the current instant without the date or time.

  This clock is based on the best available system clock. This may use System.currentTimeMillis(), or a higher resolution clock if one is available.

  Conversion from instant to date or time uses the UTC time-zone.

  The returned implementation is immutable, thread-safe and Serializable. It is equivalent to system(ZoneOffset.UTC).

  Returns:

  a clock that uses the best available system clock in the UTC zone, not null

• systemDefaultZone

  public static Clock systemDefaultZone()

  Obtains a clock that returns the current instant using the best available system clock, converting to date and time using the default time-zone.

  This clock is based on the best available system clock. This may use System.currentTimeMillis(), or a higher resolution clock if one is available.

  Using this method hard codes a dependency to the default time-zone into your application. It is recommended to avoid this and use a specific time-zone whenever possible. The UTC clock should be used when you need the current instant without the date or time.

  The returned implementation is immutable, thread-safe and Serializable. It is equivalent to system(ZoneId.systemDefault()).

  Returns:

  a clock that uses the best available system clock in the default zone, not null

  See Also:

  ZoneId.systemDefault()

• system

  public static Clock system​(ZoneId zone)

  Obtains a clock that returns the current instant using the best available system clock.

  This clock is based on the best available system clock. This may use System.currentTimeMillis(), or a higher resolution clock if one is available.

  Conversion from instant to date or time uses the specified time-zone.

  The returned implementation is immutable, thread-safe and Serializable.

  Parameters:

  zone - the time-zone to use to convert the instant to date-time, not null

  Returns:

  a clock that uses the best available system clock in the specified zone, not null

• tickMillis

  public static Clock tickMillis​(ZoneId zone)

  Obtains a clock that returns the current instant ticking in whole milliseconds using the best available system clock.

  This clock will always have the nano-of-second field truncated to milliseconds. This ensures that the visible time ticks in whole milliseconds. The underlying clock is the best available system clock, equivalent to using system(ZoneId).

  Implementations may use a caching strategy for performance reasons. As such, it is possible that the start of the millisecond observed via this clock will be later than that observed directly via the underlying clock.

  The returned implementation is immutable, thread-safe and Serializable. It is equivalent to tick(system(zone), Duration.ofMillis(1)).

  Parameters:

  zone - the time-zone to use to convert the instant to date-time, not null

  Returns:

  a clock that ticks in whole milliseconds using the specified zone, not null

  Since:

  9

• tickSeconds

  public static Clock tickSeconds​(ZoneId zone)

  Obtains a clock that returns the current instant ticking in whole seconds using the best available system clock.

  This clock will always have the nano-of-second field set to zero. This ensures that the visible time ticks in whole seconds. The underlying clock is the best available system clock, equivalent to using system(ZoneId).

  Implementations may use a caching strategy for performance reasons. As such, it is possible that the start of the second observed via this clock will be later than that observed directly via the underlying clock.

  The returned implementation is immutable, thread-safe and Serializable. It is equivalent to tick(system(zone), Duration.ofSeconds(1)).

  Parameters:

  zone - the time-zone to use to convert the instant to date-time, not null

  Returns:

  a clock that ticks in whole seconds using the specified zone, not null

• tickMinutes

  public static Clock tickMinutes​(ZoneId zone)

  Obtains a clock that returns the current instant ticking in whole minutes using the best available system clock.

  This clock will always have the nano-of-second and second-of-minute fields set to zero. This ensures that the visible time ticks in whole minutes. The underlying clock is the best available system clock, equivalent to using system(ZoneId).

  Implementations may use a caching strategy for performance reasons. As such, it is possible that the start of the minute observed via this clock will be later than that observed directly via the underlying clock.

  The returned implementation is immutable, thread-safe and Serializable. It is equivalent to tick(system(zone), Duration.ofMinutes(1)).

  Parameters:

  zone - the time-zone to use to convert the instant to date-time, not null

  Returns:

  a clock that ticks in whole minutes using the specified zone, not null

• tick

  public static Clock tick​(Clock baseClock,
                           Duration tickDuration)

  Obtains a clock that returns instants from the specified clock truncated to the nearest occurrence of the specified duration.

  This clock will only tick as per the specified duration. Thus, if the duration is half a second, the clock will return instants truncated to the half second.

  The tick duration must be positive. If it has a part smaller than a whole millisecond, then the whole duration must divide into one second without leaving a remainder. All normal tick durations will match these criteria, including any multiple of hours, minutes, seconds and milliseconds, and sensible nanosecond durations, such as 20ns, 250,000ns and 500,000ns.

  A duration of zero or one nanosecond would have no truncation effect. Passing one of these will return the underlying clock.

  Implementations may use a caching strategy for performance reasons. As such, it is possible that the start of the requested duration observed via this clock will be later than that observed directly via the underlying clock.

  The returned implementation is immutable, thread-safe and Serializable providing that the base clock is.

  Parameters:

  baseClock - the base clock to base the ticking clock on, not null

  tickDuration - the duration of each visible tick, not negative, not null

  Returns:

  a clock that ticks in whole units of the duration, not null

  Throws:

  IllegalArgumentException - if the duration is negative, or has a part smaller than a whole millisecond such that the whole duration is not divisible into one second

  ArithmeticException - if the duration is too large to be represented as nanos

• fixed

  public static Clock fixed​(Instant fixedInstant,
                            ZoneId zone)

  Obtains a clock that always returns the same instant.

  This clock simply returns the specified instant. As such, it is not a clock in the conventional sense. The main use case for this is in testing, where the fixed clock ensures tests are not dependent on the current clock.

  The returned implementation is immutable, thread-safe and Serializable.

  Parameters:

  fixedInstant - the instant to use as the clock, not null

  zone - the time-zone to use to convert the instant to date-time, not null

  Returns:

  a clock that always returns the same instant, not null

• offset

  public static Clock offset​(Clock baseClock,
                             Duration offsetDuration)

  Obtains a clock that returns instants from the specified clock with the specified duration added

  This clock wraps another clock, returning instants that are later by the specified duration. If the duration is negative, the instants will be earlier than the current date and time. The main use case for this is to simulate running in the future or in the past.

  A duration of zero would have no offsetting effect. Passing zero will return the underlying clock.

  The returned implementation is immutable, thread-safe and Serializable providing that the base clock is.

  Parameters:

  baseClock - the base clock to add the duration to, not null

  offsetDuration - the duration to add, not null

  Returns:

  a clock based on the base clock with the duration added, not null

• getZone

  public abstract ZoneId getZone()

  Gets the time-zone being used to create dates and times.

  A clock will typically obtain the current instant and then convert that to a date or time using a time-zone. This method returns the time-zone used.

  Returns:

  the time-zone being used to interpret instants, not null

• withZone

  public abstract Clock withZone​(ZoneId zone)

  Returns a copy of this clock with a different time-zone.

  A clock will typically obtain the current instant and then convert that to a date or time using a time-zone. This method returns a clock with similar properties but using a different time-zone.

  Parameters:

  zone - the time-zone to change to, not null

  Returns:

  a clock based on this clock with the specified time-zone, not null

• millis

  public long millis()

  Gets the current millisecond instant of the clock.

  This returns the millisecond-based instant, measured from 1970-01-01T00:00Z (UTC). This is equivalent to the definition of System.currentTimeMillis().

  Most applications should avoid this method and use Instant to represent an instant on the time-line rather than a raw millisecond value. This method is provided to allow the use of the clock in high performance use cases where the creation of an object would be unacceptable.

  The default implementation currently calls instant().

  Returns:

  the current millisecond instant from this clock, measured from the Java epoch of 1970-01-01T00:00Z (UTC), not null

  Throws:

  DateTimeException - if the instant cannot be obtained, not thrown by most implementations

• instant

  public abstract Instant instant()

  Gets the current instant of the clock.

  This returns an instant representing the current instant as defined by the clock.

  Returns:

  the current instant from this clock, not null

  Throws:

  DateTimeException - if the instant cannot be obtained, not thrown by most implementations

• equals

  public boolean equals​(Object obj)

  Overrides:

  equals in class Object

  Parameters:

  obj - the object to check, null returns false

  Returns:

  true if this is equal to the other clock

  See Also:

  Object.hashCode(), HashMap

• hashCode

  public int hashCode()

  A hash code for this clock.

  Clocks should override this method based on their state and to meet the contract of Object.hashCode(). If not overridden, the behavior is defined by Object.hashCode()

  Overrides:

  hashCode in class Object

  Returns:

  a suitable hash code

  See Also:

  Object.equals(java.lang.Object), System.identityHashCode(java.lang.Object)