rust: kernel: Mark rust_fmt_argument as extern "C" by sulix · Pull Request #967 · Rust-for-Linux/linux
approved these changes Feb 14, 2023
ojeda
mentioned this pull request
71 tasks
The rust_fmt_argument function is called from printk() to handle the %pA format specifier. Since it's called from C, we should mark it extern "C" to make sure it's ABI compatible. Cc: stable@vger.kernel.org Fixes: 247b365 ("rust: add `kernel` crate") Signed-off-by: David Gow <davidgow@google.com>
sulix
changed the base branch from
rust-fixes
to
rust
ojeda pushed a commit that referenced this pull request
Feb 15, 2023
The rust_fmt_argument function is called from printk() to handle the %pA format specifier. Since it's called from C, we should mark it extern "C" to make sure it's ABI compatible. Cc: stable@vger.kernel.org Fixes: 247b365 ("rust: add `kernel` crate") Signed-off-by: David Gow <davidgow@google.com> Link: #967 Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> [Applied `rustfmt`] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
sulix
mentioned this pull request
mairacanal pushed a commit to mairacanal/linux that referenced this pull request
Mar 2, 2023
The rust_fmt_argument function is called from printk() to handle the %pA format specifier. Since it's called from C, we should mark it extern "C" to make sure it's ABI compatible. Cc: stable@vger.kernel.org Fixes: 247b365 ("rust: add `kernel` crate") Signed-off-by: David Gow <davidgow@google.com> Link: Rust-for-Linux#967 Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> [Applied `rustfmt`] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
matthewtgilbride pushed a commit to matthewtgilbride/linux that referenced this pull request
Mar 7, 2023
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty Rust-for-Linux#967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 5, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there is no option to prevent that, not even `force_explicit_abi` [3]). Therefore, use an `allow` instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 5, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there is no option to prevent that, not even `force_explicit_abi` [3]). Therefore, use an `allow` instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 5, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there does not seem to be an option to prevent that: `force_explicit_abi` does not allow to control that part, and even if it did, or if there was another option, we may not use it, since so far we have been using the defaults). Therefore, use `allow`s instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 21, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there does not seem to be an option to prevent that: `force_explicit_abi` does not allow to control that part, and even if it did, or if there was another option, we may not use it, since so far we have been using the defaults). Therefore, use `allow`s instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 21, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there does not seem to be an option to prevent that: `force_explicit_abi` does not allow to control that part, and even if it did, or if there was another option, we may not use it, since so far we have been using the defaults). Therefore, use `allow`s instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 21, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there does not seem to be an option to prevent that: `force_explicit_abi` does not allow to control that part, and even if it did, or if there was another option, we may not use it, since so far we have been using the defaults). Therefore, use `allow`s instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda added a commit to ojeda/linux that referenced this pull request
Jun 21, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In some cases, we need to use the Rust ABI even with `#[no_mangle]`, and for that, one may use `extern "Rust"` explicitly, but `rustfmt` overwrites it (and there does not seem to be an option to prevent that: `force_explicit_abi` does not allow to control that part, and even if it did, or if there was another option, we may not use it, since so far we have been using the defaults). Therefore, use `allow`s instead for the few cases we had. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: https://rust-lang.github.io/rustfmt/?version=v1.5.2&search=force_explicit_abi#force_explicit_abi [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request
Jul 29, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
fbq pushed a commit that referenced this pull request
Jul 31, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: #967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org
ojeda added a commit that referenced this pull request
Aug 14, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: #967 [2] Link: rust-lang/rustfmt#5701 [3] Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 16, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 16, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 16, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 17, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 18, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 23, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 27, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 27, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 27, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Aug 31, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 2, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 2, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 7, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 7, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 14, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 14, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 20, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Sep 24, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
vtta pushed a commit to vtta/linux-archive that referenced this pull request
Sep 29, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Oct 6, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Oct 10, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Oct 11, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Oct 20, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Oct 20, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Nov 2, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Nov 2, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Nov 9, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Nov 14, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst pushed a commit to herrnst/linux-asahi that referenced this pull request
Nov 18, 2023
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode characters