This adds a new functionality to the assertion module: a dedicated
check for regular expressions. So far it's possible to use
`assert.ok(regexp.test(string))`. This is not ideal though when it
comes to the error message, since it's not possible to know how
either of the input values look like. It's just known that the
assertion failed.
This allows to pass through the regular expression and the input
string. The string is then matched against the regular expression
and reports a expressive error message in case of a failure.

PR-URL: #30929
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>

Notable changes:

* assert:
  * Implement `assert.match()` and `assert.doesNotMatch()` (Ruben
    Bridgewater) #30929
* events:
  * Add `EventEmitter.on` to async iterate over events (Matteo Collina)
    #27994
  * Allow monitoring error events (Gerhard Stoebich)
    #30932
* fs:
  * Allow overriding `fs` for streams (Robert Nagy)
    #29083
* perf_hooks:
  * Move `perf_hooks` out of experimental (legendecas)
    #31101
* repl:
  * Implement ZSH-like reverse-i-search (Ruben Bridgewater)
    #31006
* tls:
  * Add PSK (pre-shared key) support (Denys Otrishko)
    #23188

PR-URL: #31238

Notable changes:

* assert:
  * Implement `assert.match()` and `assert.doesNotMatch()` (Ruben
    Bridgewater) #30929
* events:
  * Add `EventEmitter.on` to async iterate over events (Matteo Collina)
    #27994
  * Allow monitoring error events (Gerhard Stoebich)
    #30932
* fs:
  * Allow overriding `fs` for streams (Robert Nagy)
    #29083
* perf_hooks:
  * Move `perf_hooks` out of experimental (legendecas)
    #31101
* repl:
  * Implement ZSH-like reverse-i-search (Ruben Bridgewater)
    #31006
* tls:
  * Add PSK (pre-shared key) support (Denys Otrishko)
    #23188

PR-URL: #31238

Notable changes:

* assert:
  * Implement `assert.match()` and `assert.doesNotMatch()` (Ruben
    Bridgewater) #30929
* events:
  * Add `EventEmitter.on` to async iterate over events (Matteo Collina)
    #27994
  * Allow monitoring error events (Gerhard Stoebich)
    #30932
* fs:
  * Allow overriding `fs` for streams (Robert Nagy)
    #29083
* perf_hooks:
  * Move `perf_hooks` out of experimental (legendecas)
    #31101
* repl:
  * Implement ZSH-like reverse-i-search (Ruben Bridgewater)
    #31006
* tls:
  * Add PSK (pre-shared key) support (Denys Otrishko)
    #23188

PR-URL: #31238

This adds a new functionality to the assertion module: a dedicated
check for regular expressions. So far it's possible to use
`assert.ok(regexp.test(string))`. This is not ideal though when it
comes to the error message, since it's not possible to know how
either of the input values look like. It's just known that the
assertion failed.
This allows to pass through the regular expression and the input
string. The string is then matched against the regular expression
and reports a expressive error message in case of a failure.

PR-URL: nodejs#30929
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>

This adds a new functionality to the assertion module: a dedicated
check for regular expressions. So far it's possible to use
`assert.ok(regexp.test(string))`. This is not ideal though when it
comes to the error message, since it's not possible to know how
either of the input values look like. It's just known that the
assertion failed.
This allows to pass through the regular expression and the input
string. The string is then matched against the regular expression
and reports a expressive error message in case of a failure.

Backport-PR-URL: #31431
PR-URL: #30929
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>

This adds a new functionality to the assertion module: a dedicated
check for regular expressions. So far it's possible to use
`assert.ok(regexp.test(string))`. This is not ideal though when it
comes to the error message, since it's not possible to know how
either of the input values look like. It's just known that the
assertion failed.
This allows to pass through the regular expression and the input
string. The string is then matched against the regular expression
and reports a expressive error message in case of a failure.

Backport-PR-URL: #31431
PR-URL: #30929
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>

Notable changes:

New assert APIs

The `assert` module now provides experimental `assert.match()` and
`assert.doesNotMatch()` methods. They will validate that the first argument is a
string and matches (or does not match) the provided regular expression

This is an experimental feature.

Ruben Bridgewater [#30929](#30929).

Advanced serialization for IPC

The `child_process` and `cluster` modules now support a `serialization` option
to change the serialization mechanism used for IPC. The option can have one of
two values:

* `'json'` (default): `JSON.stringify()` and `JSON.parse()` are used. This is
  how message serialization was done before.
* `'advanced'`: The serialization API of the `v8` module is used. It is based on
  the HTML structured clone algorithm.
  and is able to serialize more built-in JavaScript object types, such as
  `BigInt`, `Map`, `Set` etc. as well as circular data structures.

Anna Henningsen [#30162](#30162).

CLI flags

The new `--trace-exit` CLI flag makes Node.js print a stack trace whenever the
Node.js environment is exited proactively (i.e. by invoking the `process.exit()`
function or pressing Ctrl+C).

legendecas [#30516](#30516).

___

The new `--trace-uncaught` CLI flag makes Node.js print a stack trace at the
time of throwing uncaught exceptions, rather than at the creation of the `Error`
object, if there is any.
This option is not enabled by default because it may affect garbage collection
behavior negatively.

Anna Henningsen [#30025](#30025).

___

The `--disallow-code-generation-from-strings` V8 CLI flag is now whitelisted in
the `NODE_OPTIONS` environment variable.

Shelley Vohr [#30094](#30094).

New crypto APIs

For DSA and ECDSA, a new signature encoding is now supported in addition to the
existing one (DER). The `verify` and `sign` methods accept a `dsaEncoding`
option, which can have one of two values:

* `'der'` (default): DER-encoded ASN.1 signature structure encoding `(r, s)`.
* `'ieee-p1363'`: Signature format `r || s` as proposed in IEEE-P1363.

Tobias Nießen [#29292](#29292).

___

A new method was added to `Hash`: `Hash.prototype.copy`. It makes it possible to
clone the internal state of a `Hash` object into a new `Hash` object, allowing
to compute the digest between updates.

Ben Noordhuis [#29910](#29910).

Dependency updates

libuv was updated to 1.34.0. This includes fixes to `uv_fs_copyfile()` and
`uv_interface_addresses()` and adds two new functions: `uv_sleep()` and
`uv_fs_mkstemp()`.

Colin Ihrig [#30783](#30783).

___

V8 was updated to 7.8.279.23. This includes performance improvements to object
destructuring, RegExp match failures and WebAssembly startup time.
The official release notes are available at https://v8.dev/blog/v8-release-78.

Michaël Zasso [#30109](#30109).

New EventEmitter APIs

The new `EventEmitter.on` static method allows to async iterate over events.

Matteo Collina [#27994](#27994).

___

It is now possible to monitor `'error'` events on an `EventEmitter` without
consuming the emitted error by installing a listener using the symbol
`EventEmitter.errorMonitor`.

Gerhard Stoebich [#30932](#30932).

___

Using `async` functions with event handlers is problematic, because it
can lead to an unhandled rejection in case of a thrown exception.

The experimental `captureRejections` option in the `EventEmitter` constructor or
the global setting change this behavior, installing a
`.then(undefined, handler)` handler on the `Promise`. This handler routes the
exception asynchronously to the `Symbol.for('nodejs.rejection')` method if there
is one, or to the `'error'` event handler if there is none.

Setting `EventEmitter.captureRejections = true` will change the default for all
new instances of `EventEmitter`.

This is an experimental feature.

Matteo Collina [#27867](#27867).

Performance Hooks are no longer experimental

The `perf_hooks` module is now considered a stable API.

legendecas [#31101](#31101).

Introduction of experimental WebAssembly System Interface (WASI) support

A new core module, `wasi`, is introduced to provide an implementation of the
[WebAssembly System Interface](https://wasi.dev/) specification.
WASI gives sandboxed WebAssembly applications access to the
underlying operating system via a collection of POSIX-like functions.

This is an experimental feature.

Colin Ihrig [#30258](#30258).

PR-URL: #31691

Notable changes:

New assert APIs

The `assert` module now provides experimental `assert.match()` and
`assert.doesNotMatch()` methods. They will validate that the first argument is a
string and matches (or does not match) the provided regular expression

This is an experimental feature.

Ruben Bridgewater [#30929](#30929).

Advanced serialization for IPC

The `child_process` and `cluster` modules now support a `serialization` option
to change the serialization mechanism used for IPC. The option can have one of
two values:

* `'json'` (default): `JSON.stringify()` and `JSON.parse()` are used. This is
  how message serialization was done before.
* `'advanced'`: The serialization API of the `v8` module is used. It is based on
  the HTML structured clone algorithm.
  and is able to serialize more built-in JavaScript object types, such as
  `BigInt`, `Map`, `Set` etc. as well as circular data structures.

Anna Henningsen [#30162](#30162).

CLI flags

The new `--trace-exit` CLI flag makes Node.js print a stack trace whenever the
Node.js environment is exited proactively (i.e. by invoking the `process.exit()`
function or pressing Ctrl+C).

legendecas [#30516](#30516).

___

The new `--trace-uncaught` CLI flag makes Node.js print a stack trace at the
time of throwing uncaught exceptions, rather than at the creation of the `Error`
object, if there is any.
This option is not enabled by default because it may affect garbage collection
behavior negatively.

Anna Henningsen [#30025](#30025).

___

The `--disallow-code-generation-from-strings` V8 CLI flag is now whitelisted in
the `NODE_OPTIONS` environment variable.

Shelley Vohr [#30094](#30094).

New crypto APIs

For DSA and ECDSA, a new signature encoding is now supported in addition to the
existing one (DER). The `verify` and `sign` methods accept a `dsaEncoding`
option, which can have one of two values:

* `'der'` (default): DER-encoded ASN.1 signature structure encoding `(r, s)`.
* `'ieee-p1363'`: Signature format `r || s` as proposed in IEEE-P1363.

Tobias Nießen [#29292](#29292).

___

A new method was added to `Hash`: `Hash.prototype.copy`. It makes it possible to
clone the internal state of a `Hash` object into a new `Hash` object, allowing
to compute the digest between updates.

Ben Noordhuis [#29910](#29910).

Dependency updates

libuv was updated to 1.34.0. This includes fixes to `uv_fs_copyfile()` and
`uv_interface_addresses()` and adds two new functions: `uv_sleep()` and
`uv_fs_mkstemp()`.

Colin Ihrig [#30783](#30783).

___

V8 was updated to 7.8.279.23. This includes performance improvements to object
destructuring, RegExp match failures and WebAssembly startup time.
The official release notes are available at https://v8.dev/blog/v8-release-78.

Michaël Zasso [#30109](#30109).

New EventEmitter APIs

The new `EventEmitter.on` static method allows to async iterate over events.

Matteo Collina [#27994](#27994).

___

It is now possible to monitor `'error'` events on an `EventEmitter` without
consuming the emitted error by installing a listener using the symbol
`EventEmitter.errorMonitor`.

Gerhard Stoebich [#30932](#30932).

___

Using `async` functions with event handlers is problematic, because it
can lead to an unhandled rejection in case of a thrown exception.

The experimental `captureRejections` option in the `EventEmitter` constructor or
the global setting change this behavior, installing a
`.then(undefined, handler)` handler on the `Promise`. This handler routes the
exception asynchronously to the `Symbol.for('nodejs.rejection')` method if there
is one, or to the `'error'` event handler if there is none.

Setting `EventEmitter.captureRejections = true` will change the default for all
new instances of `EventEmitter`.

This is an experimental feature.

Matteo Collina [#27867](#27867).

Performance Hooks are no longer experimental

The `perf_hooks` module is now considered a stable API.

legendecas [#31101](#31101).

Introduction of experimental WebAssembly System Interface (WASI) support

A new core module, `wasi`, is introduced to provide an implementation of the
[WebAssembly System Interface](https://wasi.dev/) specification.
WASI gives sandboxed WebAssembly applications access to the
underlying operating system via a collection of POSIX-like functions.

This is an experimental feature.

Colin Ihrig [#30258](#30258).

PR-URL: #31691