GitHub - puddly/zigpy-cli: Command line interface for zigpy

A unified command line interface for zigpy radios. The goal of this project is to allow low-level network management from an intuitive command line interface and to group useful Zigbee tools into a single binary.

Installation

$ pip install git+https://github.com/zigpy/zigpy-cli.git

Usage

$ zigpy --help
Usage: zigpy [OPTIONS] COMMAND [ARGS]...

Options:
  -v, --verbose
  --help         Show this message and exit.

Commands:
  ota
  radio

Network commands

Network commands require the radio type to be specified. See zigpy radio --help for the list of supported types.

Reading network information:

$ zigpy radio znp /dev/ttyUSB0 network info
PAN ID:                0x718B
Extended PAN ID:       33:29:33:5e:30:42:64:48
Channel:               15
Channel mask:          [15]
NWK update ID:         0
Device IEEE:           00:12:4b:00:1c:ce:33:85
Device NWK:            0x0000
Network key:           cc:44:a6:4e:23:82:30:9e:35:0f:c6:6a:89:c8:dd:7d
Network key sequence:  0

Forming a network (with verbose logging enabled):

$ zigpy -vvvv radio znp /dev/cu.usb* form
2021-07-12 13:24:54.764 host asyncio DEBUG Using selector: KqueueSelector
2021-07-12 13:24:54.933 host zigpy_znp.uart DEBUG Connecting to /dev/ttyUSB0 at 115200 baud
2021-07-12 13:24:54.940 host zigpy_znp.uart DEBUG Opened /dev/ttyUSB0 serial port
2021-07-12 13:24:54.941 host zigpy_znp.uart DEBUG Toggling RTS/CTS to skip CC2652R bootloader
2021-07-12 13:24:55.404 host zigpy_znp.uart DEBUG Connected to /dev/ttyUSB0 at 115200 baud
2021-07-12 13:24:55.404 host zigpy_znp.api DEBUG Waiting 1s before sending anything
2021-07-12 13:24:56.409 host zigpy_znp.api DEBUG Sending bootloader skip byte
...
PAN ID:                0xAA8A
Extended PAN ID:       35:8f:dc:b6:7a:19:33:c3
Channel:               15
Channel mask:          [15]
NWK update ID:         0
Device IEEE:           00:12:4b:00:1c:ce:33:85
Device NWK:            0x0000
Network key:           8c:2d:2d:a6:ca:95:30:04:11:6b:d5:dd:32:9e:b6:a8
Network key sequence:  0
2021-07-12 13:25:15.316 host zigpy_znp.uart DEBUG Closing serial port

OTA

Display basic information about OTA files:

$ zigpy ota info 10047227-1.2-TRADFRI-cv-cct-unified-2.3.050.ota.ota.signed
Header: OTAImageHeader(upgrade_file_id=200208670, header_version=256, header_length=56, field_control=<FieldControl.0: 0>, manufacturer_id=4476, image_type=16902, file_version=587531825, stack_version=2, header_string='GBL GBL_tradfri_cv_cct_unified', image_size=208766, *device_specific_file=False, *hardware_versions_present=False, *key=ImageKey(manufacturer_id=4476, image_type=16902), *security_credential_version_present=False)
Number of subelements: 1
Validation result: ValidationResult.VALID

Dump embedded firmware for further analysis:

$ zigpy ota dump-firmware 10047227-1.2-TRADFRI-cv-cct-unified-2.3.050.ota.ota.signed - \
      | commander ebl print /dev/stdin \
      | grep 'Ember Version'
Ember Version:    6.3.1.1