arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Waterfall

alignmentgroup – Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.

base – Sets where the bar base is drawn (in position axis units).

cliponaxis – Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.

connector – plotly.graph_objects.waterfall.Connector instance or dict with compatible properties

constraintext – Constrain the size of text inside or outside a bar to be no larger than the bar itself.

customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements

customdatasrc – Sets the source reference on Chart Studio Cloud for customdata.

decreasing – plotly.graph_objects.waterfall.Decreasing instance or dict with compatible properties

dx – Sets the x coordinate step. See x0 for more info.

dy – Sets the y coordinate step. See y0 for more info.

hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo.

hoverlabel – plotly.graph_objects.waterfall.Hoverlabel instance or dict with compatible properties

hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}” as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, “xother” will be added to those with different x positions from the first point. An underscore before or after “(x|y)other” will add a space on that side, only when this field is shown. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Variables that can’t be found will be replaced with the specifier. For example, a template of “data: %{x}, %{y}” will result in a value of “data: 1, %{y}” if x is 1 and y is missing. Variables with an undefined value will be replaced with the fallback value. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, all attributes that can be specified per-point (the ones that are arrayOk: true) are available. Finally, the template string has access to variables initial, delta and final. Anything contained in tag <extra> is displayed in the secondary box, for example <extra>%{fullData.name}</extra>. To hide the secondary box completely, use an empty tag <extra></extra>.

hovertemplatefallback – Fallback string that’s displayed when a variable referenced in a template is missing. If the boolean value ‘false’ is passed in, the specifier with the missing variable will be displayed.

hovertemplatesrc – Sets the source reference on Chart Studio Cloud for hovertemplate.

hovertext – Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. To be seen, trace hoverinfo must contain a “text” flag.

hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext.

ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

idssrc – Sets the source reference on Chart Studio Cloud for ids.

increasing – plotly.graph_objects.waterfall.Increasing instance or dict with compatible properties

insidetextanchor – Determines if texts are kept at center or start/end points in textposition “inside” mode.

insidetextfont – Sets the font used for text lying inside the bar.

legend – Sets the reference to a legend to show this trace in. References to these legends are “legend”, “legend2”, “legend3”, etc. Settings for these legends are set in the layout, under layout.legend, layout.legend2, etc.

legendgroup – Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

legendgrouptitle – :class:`plotly.graph_objects.waterfall.Legendgrouptitle ` instance or dict with compatible properties

legendrank – Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with “reversed” legend.traceorder they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

legendwidth – Sets the width (in px or fraction) of the legend for this trace.

measure – An array containing types of values. By default the values are considered as ‘relative’. However; it is possible to use ‘total’ to compute the sums. Also ‘absolute’ could be applied to reset the computed total or to declare an initial value where needed.

measuresrc – Sets the source reference on Chart Studio Cloud for measure.

meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

metasrc – Sets the source reference on Chart Studio Cloud for meta.

name – Sets the trace name. The trace name appears as the legend item and on hover.

offset – Shifts the position where the bar is drawn (in position axis units). In “group” barmode, traces that set “offset” will be excluded and drawn in “overlay” mode instead.

offsetgroup – Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

offsetsrc – Sets the source reference on Chart Studio Cloud for offset.

opacity – Sets the opacity of the trace.

orientation – Sets the orientation of the bars. With “v” (“h”), the value of the each bar spans along the vertical (horizontal).

outsidetextfont – Sets the font used for text lying outside the bar.

selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.

showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.

stream – plotly.graph_objects.waterfall.Stream instance or dict with compatible properties

text – Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.

textangle – Sets the angle of the tick labels with respect to the bar. For example, a tickangle of -90 draws the tick labels vertically. With “auto” the texts may automatically be rotated to fit with the maximum size in bars.

textfont – Sets the font used for text.

textinfo – Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace).

textposition – Specifies the location of the text. “inside” positions text inside, next to the bar end (rotated and scaled if needed). “outside” positions text outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. “auto” tries to position text inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If “none”, no text appears.

textpositionsrc – Sets the source reference on Chart Studio Cloud for textposition.

textsrc – Sets the source reference on Chart Studio Cloud for text.

texttemplate – Template string used for rendering the information text that appears on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Variables that can’t be found will be replaced with the specifier. For example, a template of “data: %{x}, %{y}” will result in a value of “data: 1, %{y}” if x is 1 and y is missing. Variables with an undefined value will be replaced with the fallback value. All attributes that can be specified per-point (the ones that are arrayOk: true) are available. Finally, the template string has access to variables initial, delta, final and label.

texttemplatefallback – Fallback string that’s displayed when a variable referenced in a template is missing. If the boolean value ‘false’ is passed in, the specifier with the missing variable will be displayed.

texttemplatesrc – Sets the source reference on Chart Studio Cloud for texttemplate.

totals – plotly.graph_objects.waterfall.Totals instance or dict with compatible properties

uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

width – Sets the bar width (in position axis units).

widthsrc – Sets the source reference on Chart Studio Cloud for width.

x – Sets the x coordinates.

x0 – Alternate to x. Builds a linear space of x coordinates. Use with dx where x0 is the starting coordinate and dx the step.

xaxis – Sets a reference between this trace’s x coordinates and a 2D cartesian x axis. If “x” (the default value), the x coordinates refer to layout.xaxis. If “x2”, the x coordinates refer to layout.xaxis2, and so on.

xhoverformat – Sets the hover text formatting rulefor x using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using xaxis.hoverformat.

xperiod – Only relevant when the axis type is “date”. Sets the period positioning in milliseconds or “M<n>” on the x axis. Special values in the form of “M<n>” could be used to declare the number of months. In this case n must be a positive integer.

xperiod0 – Only relevant when the axis type is “date”. Sets the base for period positioning in milliseconds or date string on the x0 axis. When x0period is round number of weeks, the x0period0 by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

xperiodalignment – Only relevant when the axis type is “date”. Sets the alignment of data points on the x axis.

xsrc – Sets the source reference on Chart Studio Cloud for x.

y – Sets the y coordinates.

y0 – Alternate to y. Builds a linear space of y coordinates. Use with dy where y0 is the starting coordinate and dy the step.

yaxis – Sets a reference between this trace’s y coordinates and a 2D cartesian y axis. If “y” (the default value), the y coordinates refer to layout.yaxis. If “y2”, the y coordinates refer to layout.yaxis2, and so on.

yhoverformat – Sets the hover text formatting rulefor y using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using yaxis.hoverformat.

yperiod – Only relevant when the axis type is “date”. Sets the period positioning in milliseconds or “M<n>” on the y axis. Special values in the form of “M<n>” could be used to declare the number of months. In this case n must be a positive integer.

yperiod0 – Only relevant when the axis type is “date”. Sets the base for period positioning in milliseconds or date string on the y0 axis. When y0period is round number of weeks, the y0period0 by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

yperiodalignment – Only relevant when the axis type is “date”. Sets the alignment of data points on the y axis.

ysrc – Sets the source reference on Chart Studio Cloud for y.

zorder – Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher zorder appear in front of those with lower zorder.