Unit PlatformRPi3 - Ultibo.org
Return to Unit Reference
Description
Ultibo Platform Interface unit for Raspberry Pi 3
The RPi3 B has the Activity LED connected to the GPU, access is via a Virtual GPIO (Power LED is only accessible via the GPIO expander driver).
The RPi3 B+ has the Activity LED connected to GPIO Pin 29 (Power LED is only accessible via the GPIO expander driver).
Constants
RPi3 ARM physical to VC IO mapping RPI3_VCIO_*
RPI3_VCIO_ALIAS = BCM2837_VCIO_ALIAS;
|
The VCIO Alias (For ARM Physcial to VC IO translation) |
RPi3 ARM physical to VC bus mapping RPI3_VCBUS_*
RPI3_VCBUS_ALIAS = BCM2837_VCBUS_C_ALIAS;
|
The currently selected VCBUS Alias (For ARM Physcial to VC Bus translation) |
RPi3 secure world boot RPI3_SECURE_*
RPI3_SECURE_BOOT = $00000001;
|
If 1 then startup will attempt to switch back to secure world during boot process (Moved to ARMSecureBoot) |
RPI3_SECURE_BOOT_OFFSET = $000000D4;
|
The address of the Secure Boot marker in the ARM boot stub |
RPI3_SECURE_BOOT_MARKER = $58495052;
|
The Secure Boot marker (ASCII "RPIX") |
RPi3 address of StartupHandler on reset RPI3_STARTUP_*
RPI3_STARTUP_ADDRESS = $00008000;
|
Address of StartupHandler on Reset (Obtain from linker) |
RPi3 page table address and size RPI3_PAGE_TABLE_*
RPI3_PAGE_TABLE_BASE = $00004000;
|
Place the first level Page Table after the interrupt vectors at 0x00001000 and before the code start at 0x00008000 |
RPI3_PAGE_TABLE_SIZE = SIZE_16K;
|
ARM Cortex A7 first level Page Table is exactly 16KB in size (4096 32 bit (4 byte) entries) |
RPi3 vector table address and size RPI3_VECTOR_TABLE_*
RPI3_VECTOR_TABLE_BASE = $00001000;
|
Place the Interrupt Vector Table at 0x00001000 before the code start at 0x00008000 |
RPI3_VECTOR_TABLE_SIZE = SIZE_64;
|
The Interrupt Vector Table is exactly 64 bytes (16 32 bit (4 byte) entries) |
RPI3_VECTOR_TABLE_COUNT = 8;
|
The Interrupt Vector Table contains 8 entries on an ARMv7 device |
RPi3 CPU count RPI3_CPU_*
RPI3_CPU_COUNT = BCM2837_CPU_COUNT;
|
|
RPI3_CPU_BOOT = CPU_ID_0;
|
|
RPI3_CPU_MASK = CPU_AFFINITY_0 or CPU_AFFINITY_1 or CPU_AFFINITY_2 or CPU_AFFINITY_3;
|
RPi3 IRQ/FIQ start/routing RPI3_IRQ_*, RPI3_FIQ_*
RPI3_IRQ_START = 0;
|
System wide IRQs start at zero |
RPI3_IRQ_ROUTING = CPU_ID_0;
|
Route system wide IRQs to CPU0 |
RPI3_FIQ_ROUTING = CPU_ID_0;
|
Route system wide FIQs to CPU0 |
RPI3_IRQ_LOCAL_START = BCM2837_GPU_IRQ_COUNT + BCM2837_ARM_IRQ_COUNT;
|
Local IRQs start after GPU and ARM IRQs |
RPi3 SWI RPI3_SWI_*
RPI3_SWI_COUNT = 256;
|
Number of available SWI entries |
RPi3 core timer prescaler RPI3_*_TIMER_*
RPI3_CORE_TIMER_PRESCALER = $06AAAAAB;
|
Divide the Crystal Clock by 19.2 to give a 1MHz Core Timer |
RPI3_CORE_TIMER_FREQUENCY = 1000000;
|
The Core Timer frequency from the prescaler setting above |
RPI3_GENERIC_TIMER_FREQUENCY = 1000000;
|
The ARM Generic Timer frequency from the prescaler setting above |
RPi3 kernel image name RPI3_KERNEL_*
RPI3_KERNEL_NAME = 'kernel7.img';
|
|
RPI3_KERNEL_NAME = 'kernel8.img';
|
|
RPI3_KERNEL_CONFIG = 'config.txt';
|
|
RPI3_KERNEL_COMMAND = 'cmdline.txt';
|
|
RPI3_FIRMWARE_FILES = 'bootcode.bin,start.elf,fixup.dat,armstub32-rpi3.bin,armstub64-rpi3.bin';
| |
RPI3_DTB_FILES = 'bcm2710-rpi-2-b.dtb,bcm2710-rpi-3-b.dtb,bcm2710-rpi-3-b-plus.dtb,bcm2710-rpi-cm3.dtb,bcm2710-rpi-zero-2.dtb,bcm2710-rpi-zero-2-w.dtb';
| |
RPi3 mailbox RPI3_MAILBOX_*
RPI3_MAILBOX_TIMEOUT = 100;
|
Default timeout to wait for mailbox calls to complete (Milliseconds) |
RPI3_MAILBOX_TIMEOUT_EX = 1000;
|
Extended timeout to wait for mailbox calls to complete (Milliseconds) |
RPi3 local mailbox RPI3_LOCAL_MAILBOX_*
RPI3_LOCAL_MAILBOX_TIMEOUT = 100;
|
Default timeout to wait for local mailbox calls to complete (Milliseconds) |
RPi3 framebuffer RPI3_FRAMEBUFFER_*
RPI3_FRAMEBUFFER_DESCRIPTION = 'BCM2837 Framebuffer';
|
Type definitions
None defined
Public variables
RPi3 specific Ultibo variables
RPi3CNTVOFFLow:LongWord = 0;
|
The low 32 bits of the Virtual Counter Offset register at boot time (CPU0 only) (Set by Startup). Must be initialized to remain in .data or else rewritten to zero with .bss |
RPi3CNTVOFFHigh:LongWord = 0;
|
The high 32 bits of the Virtual Counter Offset register at boot time (CPU0 only) (Set by Startup). Must be initialized to remain in .data or else rewritten to zero with .bss |
Timer variables
TimerRegisters:PBCM2837SystemTimerRegisters;
|
Mailbox variables
Mailbox0Registers:PBCM2837Mailbox0Registers;
|
Mailbox1Registers:PBCM2837Mailbox1Registers;
|
Interrupt variables
InterruptRegisters:PBCM2837InterruptRegisters;
|
InterruptEntries:array[0..(BCM2837_GPU_IRQ_COUNT + BCM2837_ARM_IRQ_COUNT - 1)] of PInterruptEntry;
|
LocalInterruptEntries:array[RPI3_IRQ_LOCAL_START..(BCM2837_IRQ_COUNT - 1),0..(RPI3_CPU_COUNT - 1)] of PInterruptEntry;
|
System call
SystemCallEntries:array[0..RPI3_SWI_COUNT - 1] of TSystemCallEntry;
|
IRQ/FIQ
IRQEnabled:array[0..2] of LongWord;
|
3 groups of IRQs to Enable/Disable (See: TBCM2837InterruptRegisters) |
FIQEnabled:LongWord;
|
The single IRQ number to Enable as FIQ instead (See: TBCM2837InterruptRegisters) |
LocalIRQEnabled:array[0..(RPI3_CPU_COUNT - 1)] of LongWord;
|
1 group of local IRQs to Enable/Disable per CPU (See: TBCM2837ARMLocalRegisters) |
LocalFIQEnabled:array[0..(RPI3_CPU_COUNT - 1)] of LongWord;
|
1 group of local FIQs to Enable/Disable per CPU (See: TBCM2837ARMLocalRegisters) |
Watchdog variables
WatchdogRegisters:PBCM2837PMWatchdogRegisters;
|
ARM local
ARMLocalRegisters:PBCM2837ARMLocalRegisters;
|
Virtual GPIO
VirtualGPIOBuffer:TBCM2837VirtualGPIOBuffer;
|
Function declarations
Initialization functions
procedure RPi3Init;
Description: To be documented
procedure RPi3SecondarySwitch; assembler; nostackframe;
Description: Secondary CPU switch from HYP mode handler
procedure RPi3SecondarySecure; assembler; nostackframe;
Description: Secondary CPU switch to secure mode handler
procedure RPi3SecondaryHandler; assembler; nostackframe;
Description: Secondary CPU startup handler routine
RPi3 platform functions
procedure RPi3SMPInit;
Description: To be documented
procedure RPi3BoardInit;
Description: To be documented
procedure RPi3MemoryInit;
Description: To be documented
procedure RPi3ClockInit;
Description: To be documented
procedure RPi3PowerInit;
Description: To be documented
procedure RPi3MailboxInit;
Description: To be documented
procedure RPi3InterruptInit;
Description: To be documented
procedure RPi3PeripheralInit;
Description: To be documented
procedure RPi3FramebufferInit;
Description: To be documented
procedure RPi3PageTableInit;
Description: Initialize the Hardware Page Tables before enabling the MMU
procedure RPi3PowerLEDEnable;
Description: To be documented
procedure RPi3PowerLEDOn;
Description: To be documented
procedure RPi3PowerLEDOff;
Description: To be documented
procedure RPi3ActivityLEDEnable;
Description: To be documented
procedure RPi3ActivityLEDOn;
Description: To be documented
procedure RPi3ActivityLEDOff;
Description: To be documented
function RPi3MailboxReceive(Mailbox,Channel:LongWord):LongWord;
Description: Receive from specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits |
|---|
procedure RPi3MailboxSend(Mailbox,Channel,Data:LongWord);
Description: Send to specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits |
|---|
function RPi3MailboxCall(Mailbox,Channel,Data:LongWord; var Response:LongWord):LongWord;
Description: Perform a transaction (Send/Receive) to specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits
Data pointer must be 16 byte aligned to allow for the 4 bit channel number |
|---|
function RPi3MailboxCallEx(Mailbox,Channel,Data:LongWord; var Response:LongWord; Timeout:LongWord):LongWord;
Description: Perform a transaction (Send/Receive) to specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits
Data pointer must be 16 byte aligned to allow for the 4 bit channel number |
|---|
function RPi3MailboxPropertyCall(Mailbox,Channel:LongWord; Data:Pointer; var Response:LongWord):LongWord;
Description: Perform a property tag transaction (Send/Receive) to specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits
Data pointer must be 16 byte aligned to allow for the 4 bit channel number |
|---|
function RPi3MailboxPropertyCallEx(Mailbox,Channel:LongWord; Data:Pointer; var Response:LongWord; Timeout:LongWord):LongWord;
Description: Perform a property tag transaction (Send/Receive) to specified mailbox on specified channel
| Note | Data = first 28 bits, Channel = last 4 bits
Data pointer must be 16 byte aligned to allow for the 4 bit channel number |
|---|
function RPi3MailboxPropertyTag(Tag:LongWord; Data:Pointer; Size:LongWord):LongWord;
Description: Request a property tag (Get/Set) from the mailbox property channel
| Data | Data does not need to include mailbox property channel header or footer. Data pointer does not need any specific alignment or caching attributes. |
|---|---|
| Size | Size must be a multiple of 4 bytes. Size must include the size of the request and response which use the same buffer. |
function RPi3RequestExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request registration of the supplied handler to the specified IRQ number
function RPi3ReleaseExIRQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request deregistration of the supplied handler from the specified IRQ number
function RPi3RequestExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request registration of the supplied handler to the specified FIQ number
function RPi3ReleaseExFIQ(CPUID,Number:LongWord; Handler:TInterruptHandler; HandlerEx:TInterruptExHandler; Parameter:Pointer):LongWord;
Description: Request deregistration of the supplied handler from the specified FIQ number
function RPi3RegisterInterrupt(Number,Mask,Priority,Flags:LongWord; Handler:TSharedInterruptHandler; Parameter:Pointer):LongWord;
Description: Request registration of the supplied handler to the specified interrupt number (Where Applicable)
function RPi3DeregisterInterrupt(Number,Mask,Priority,Flags:LongWord; Handler:TSharedInterruptHandler; Parameter:Pointer):LongWord;
Description: Request deregistration of the supplied handler from the specified interrupt number (Where Applicable)
function RPi3RegisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;
Description: Request registration of the supplied extended handler to the specified System Call number
function RPi3DeregisterSystemCallEx(CPUID,Number:LongWord; Handler:TSystemCallHandler; HandlerEx:TSystemCallExHandler):LongWord;
Description: Request deregistration of the supplied extended handler from the specified System Call number
function RPi3GetInterruptEntry(Number,Instance:LongWord; var Interrupt:TInterruptEntry):LongWord;
Description: Get the interrupt entry for the specified interrupt number and instance
function RPi3GetLocalInterruptEntry(CPUID,Number,Instance:LongWord; var Interrupt:TInterruptEntry):LongWord;
Description: Get the local interrupt entry for the specified interrupt number and instance
function RPi3GetSystemCallEntry(Number:LongWord):TSystemCallEntry;
Description: Get the system call entry for the specified system call number
function RPi3SystemRestart(Delay:LongWord):LongWord;
Description: To be documented
function RPi3SystemShutdown(Delay:LongWord):LongWord;
Description: To be documented
function RPi3SystemGetCommandLine:String;
Description: Get the Command Line from the Mailbox property tags channel
function RPi3CPUGetMemory(var Address:PtrUInt; var Length:UInt64):LongWord;
Description: Get the CPU Memory from the Mailbox property tags channel
function RPi3GPUGetState:LongWord;
Description: To be documented
function RPi3GPUGetMemory(var Address:PtrUInt; var Length:UInt64):LongWord;
Description: Get the GPU Memory from the Mailbox property tags channel
function RPi3BoardGetModel:LongWord;
Description: Get the Board Model from the Mailbox property tags channel
function RPi3BoardGetSerial:Int64;
Description: Get the Board Serial from the Mailbox property tags channel
function RPi3BoardGetRevision:LongWord;
Description: Get the Board Revision from the Mailbox property tags channel
function RPi3BoardGetMACAddress:String;
Description: Get the Board MAC Address from the Mailbox property tags channel
function RPi3FirmwareGetRevision:LongWord;
Description: Get the Firmware Revision from the Mailbox property tags channel
function RPi3FirmwareGetThrottled:LongWord;
Description: Get the Firmware Throttling state from the Mailbox property tags channel
function RPi3PowerGetWait(PowerId:LongWord):LongWord;
Description: Get the Power Wait from the Mailbox property tags channel
function RPi3PowerGetState(PowerId:LongWord):LongWord;
Description: Get the Power State from the Mailbox property tags channel
function RPi3PowerSetState(PowerId,State:LongWord; Wait:Boolean):LongWord;
Description: Set the Power State in the Mailbox property tags channel
| Note | Power Lock not required due to Mailbox Property Call serialization |
|---|
function RPi3ClockGetCount:LongWord;
Description: Gets the current system clock count (32 least significant bits of total)
| Note | On the Raspberry Pi this comes from the System Timer free running counter which runs at 1MHz and therefore overflows every 4295 seconds |
|---|
function RPi3ClockGetTotal:Int64;
Description: Gets the total system clock count
| Note | On the Raspberry Pi this comes from the System Timer free running counter which runs at 1MHz, the clock interrupt also uses this timer to increment the clock every second and therefore keep time. |
|---|
function RPi3ClockGetRate(ClockId:LongWord):LongWord;
Description: Get the Clock Rate from the Mailbox property tags channel
function RPi3ClockSetRate(ClockId,Rate:LongWord; Turbo:Boolean):LongWord;
Description: Set the Clock Rate in the Mailbox property tags channel
function RPi3ClockGetState(ClockId:LongWord):LongWord;
Description: Get the Clock State from the Mailbox property tags channel
function RPi3ClockSetState(ClockId,State:LongWord):LongWord;
Description: Set the Clock State in the Mailbox property tags channel
function RPi3ClockGetMinRate(ClockId:LongWord):LongWord;
Description: Get the Clock Min Rate from the Mailbox property tags channel
function RPi3ClockGetMaxRate(ClockId:LongWord):LongWord;
Description: Get the Clock Max Rate from the Mailbox property tags channel
function RPi3TurboGetState(TurboId:LongWord):LongWord;
Description: Get the Turbo State from the Mailbox property tags channel
function RPi3TurboSetState(TurboId,State:LongWord):LongWord;
Description: Set the Turbo State in the Mailbox property tags channel
function RPi3VoltageGetValue(VoltageId:LongWord):LongWord;
Description: Get the Voltage Value from the Mailbox property tags channel
function RPi3VoltageSetValue(VoltageId,Value:LongWord):LongWord;
Description: Set the Voltage Value in the Mailbox property tags channel
function RPi3VoltageGetMinValue(VoltageId:LongWord):LongWord;
Description: Get the Voltage Min Value from the Mailbox property tags channel
function RPi3VoltageGetMaxValue(VoltageId:LongWord):LongWord;
Description: Get the Voltage Max Value from the Mailbox property tags channel
function RPi3TemperatureGetCurrent(TemperatureId:LongWord):LongWord;
Description: Get the Temperature Current from the Mailbox property tags channel
function RPi3TemperatureGetMaximum(TemperatureId:LongWord):LongWord;
Description: Get the Temperature Maximum Model from the Mailbox property tags channel
function RPi3GPUMemoryAllocate(Length,Alignment,Flags:LongWord):THandle;
Description: Allocate GPU Memory from the Mailbox property tags channel
function RPi3GPUMemoryRelease(Handle:THandle):LongWord;
Description: Release GPU Memory from the Mailbox property tags channel
function RPi3GPUMemoryLock(Handle:THandle):LongWord;
Description: Lock GPU Memory from the Mailbox property tags channel
function RPi3GPUMemoryUnlock(Handle:THandle):LongWord;
Description: Unlock GPU Memory from the Mailbox property tags channel
function RPi3GPUExecuteCode(Address:Pointer; R0,R1,R2,R3,R4,R5:LongWord):LongWord;
Description: Execute GPU Code from the Mailbox property tags channel
function RPi3DispmanxHandleGet(Resource:THandle):THandle;
Description: Get Dispmanx Memory Handle from the Mailbox property tags channel
function RPi3EDIDBlockGet(Block:LongWord; Buffer:Pointer; Length:LongWord):LongWord;
Description: Get EDID Block from the Mailbox property tags channel
function RPi3FramebufferAllocate(Alignment:LongWord; var Address,Length:LongWord):LongWord;
Description: Allocate Framebuffer from the Mailbox property tags channel
function RPi3FramebufferRelease:LongWord;
Description: Release Framebuffer from the Mailbox property tags channel
function RPi3FramebufferSetState(State:LongWord):LongWord;
Description: Set Framebuffer State (Blank Screen) from the Mailbox property tags channel
function RPi3FramebufferGetDimensions(var Width,Height,Top,Bottom,Left,Right:LongWord):LongWord;
Description: Get Framebuffer Dimensions from the Mailbox property tags channel
function RPi3FramebufferGetPhysical(var Width,Height:LongWord):LongWord;
Description: Get Framebuffer Physical size from the Mailbox property tags channel
function RPi3FramebufferSetPhysical(var Width,Height:LongWord):LongWord;
Description: Set Framebuffer Physical size from the Mailbox property tags channel
function RPi3FramebufferTestPhysical(var Width,Height:LongWord):LongWord;
Description: Test Framebuffer Physical size from the Mailbox property tags channel
function RPi3FramebufferGetVirtual(var Width,Height:LongWord):LongWord;
Description: Get Framebuffer Virtual size from the Mailbox property tags channel
function RPi3FramebufferSetVirtual(var Width,Height:LongWord):LongWord;
Description: Set Framebuffer Virtual size from the Mailbox property tags channel
function RPi3FramebufferTestVirtual(var Width,Height:LongWord):LongWord;
Description: Test Framebuffer Virtual size from the Mailbox property tags channel
function RPi3FramebufferGetDepth(var Depth:LongWord):LongWord;
Description: Get Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel
function RPi3FramebufferSetDepth(var Depth:LongWord):LongWord;
Description: Set Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel
function RPi3FramebufferTestDepth(var Depth:LongWord):LongWord;
Description: Test Framebuffer Depth (Bits per pixel) from the Mailbox property tags channel
function RPi3FramebufferGetPixelOrder(var Order:LongWord):LongWord;
Description: Get Framebuffer Pixel Order (RGB) from the Mailbox property tags channel
function RPi3FramebufferSetPixelOrder(var Order:LongWord):LongWord;
Description: Set Framebuffer Pixel Order (RGB) from the Mailbox property tags channel
function RPi3FramebufferTestPixelOrder(var Order:LongWord):LongWord;
Description: Test Framebuffer Pixel Order (RGB) from the Mailbox property tags channel
function RPi3FramebufferGetAlphaMode(var Mode:LongWord):LongWord;
Description: Get Framebuffer Alpha Mode from the Mailbox property tags channel
function RPi3FramebufferSetAlphaMode(var Mode:LongWord):LongWord;
Description: Set Framebuffer Alpha Mode from the Mailbox property tags channel
function RPi3FramebufferTestAlphaMode(var Mode:LongWord):LongWord;
Description: Test Framebuffer Alpha Mode from the Mailbox property tags channel
function RPi3FramebufferGetPitch:LongWord;
Description: Get Framebuffer Pitch (Bytes per line) from the Mailbox property tags channel
function RPi3FramebufferGetOffset(var X,Y:LongWord):LongWord;
Description: Get Framebuffer Virtual Offset from the Mailbox property tags channel
function RPi3FramebufferSetOffset(var X,Y:LongWord):LongWord;
Description: Set Framebuffer Virtual Offset from the Mailbox property tags channel
function RPi3FramebufferTestOffset(var X,Y:LongWord):LongWord;
Description: Test Framebuffer Virtual Offset from the Mailbox property tags channel
function RPi3FramebufferGetOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;
Description: Get Framebuffer Overscan from the Mailbox property tags channel
function RPi3FramebufferSetOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;
Description: Set Framebuffer Overscan from the Mailbox property tags channel
function RPi3FramebufferTestOverscan(var Top,Bottom,Left,Right:LongWord):LongWord;
Description: Test Framebuffer Overscan from the Mailbox property tags channel
function RPi3FramebufferGetPalette(Buffer:Pointer; Length:LongWord):LongWord;
Description: Get Framebuffer Palette from the Mailbox property tags channel
function RPi3FramebufferSetPalette(Start,Count:LongWord; Buffer:Pointer; Length:LongWord):LongWord;
Description: Set Framebuffer Palette from the Mailbox property tags channel
function RPi3FramebufferTestPalette(Start,Count:LongWord; Buffer:Pointer; Length:LongWord):LongWord;
Description: Test Framebuffer Palette from the Mailbox property tags channel
function RPi3FramebufferGetLayer(var Layer:LongInt):LongWord;
Description: Get Framebuffer Layer from the Mailbox property tags channel
function RPi3FramebufferSetLayer(var Layer:LongInt):LongWord;
Description: Set Framebuffer Layer from the Mailbox property tags channel
function RPi3FramebufferTestLayer(var Layer:LongInt):LongWord;
Description: Test Framebuffer Layer from the Mailbox property tags channel
function RPi3FramebufferTestVsync:LongWord;
Description: Test Framebuffer Vertical Sync from the Mailbox property tags channel
function RPi3FramebufferSetVsync:LongWord;
Description: Set Framebuffer Vertical Sync from the Mailbox property tags channel
function RPi3FramebufferSetBacklight(Brightness:LongWord):LongWord;
Description: Set Framebuffer Backlight Brightness from the Mailbox property tags channel
function RPi3FramebufferGetNumDisplays(var NumDisplays:LongWord):LongWord;
Description: Get the number of displays from the Mailbox property tags channel
function RPi3FramebufferGetDisplayId(DisplayNum:LongWord):LongWord;
Description: Get the display id for the specified display number from the Mailbox property tags channel
function RPi3FramebufferSetDisplayNum(DisplayNum:LongWord):LongWord;
Description: Get the display number that all framebuffer requests will refer to using the Mailbox property tags channel
function RPi3FramebufferGetDisplaySettings(DisplayNum:LongWord; var DisplaySettings:TDisplaySettings):LongWord;
Description: Get the display settings for the specified display number from the Mailbox property tags channel
function RPi3FramebufferDisplayIdToName(DisplayId:LongWord):String;
Description: Get the name for the specified display id
function RPi3TouchGetBuffer(var Address:PtrUInt):LongWord;
Description: Get the Touchscreen buffer from the Mailbox property tags channel
| Note | On current firmware versions calling TouchGetBuffer will allocate a buffer from GPU memory and render subsequent calls to TouchSetBuffer ineffective. After an initial call to TouchSetBuffer calls to TouchGetBuffer will always return the CPU allocated buffer. |
|---|
function RPi3TouchSetBuffer(Address:PtrUInt):LongWord;
Description: Set the Touchscreen buffer in the Mailbox property tags channel
function RPi3VirtualGPIOGetBuffer(var Address:PtrUInt):LongWord;
Description: Get the Virtual GPIO buffer from the Mailbox property tags channel
function RPi3VirtualGPIOSetBuffer(Address:PtrUInt):LongWord;
Description: Set the Virtual GPIO buffer in the Mailbox property tags channel
function RPi3CursorSetDefault:LongWord;
Description: Set Cursor Default (Pixels) from the Mailbox property tags channel
function RPi3CursorSetInfo(Width,Height,HotspotX,HotspotY:LongWord; Pixels:Pointer; Length:LongWord):LongWord;
Description: Set Cursor Info (Pixels) from the Mailbox property tags channel
function RPi3CursorSetState(Enabled:Boolean; X,Y:LongWord; Relative:Boolean):LongWord;
Description: Set Cursor State (Enable, X, Y) from the Mailbox property tags channel
| Relative | X, Y is relative to Display (Virtual) not Framebuffer (Physical). |
|---|
function RPi3DMAGetChannels:LongWord;
Description: Get the available DMA Channels from the Mailbox property tags channel
function RPi3VirtualGPIOAllocate:Boolean;
Description: Allocate the Virtual GPIO buffer either from memory or from the firmware
function RPi3VirtualGPIOInputGet(Pin:LongWord):LongWord;
Description: To be documented
function RPi3VirtualGPIOOutputSet(Pin,Level:LongWord):LongWord;
Description: To be documented
function RPi3VirtualGPIOFunctionSelect(Pin,Mode:LongWord):LongWord;
Description: To be documented
RPi3 thread functions
procedure RPi3SchedulerInit;
Description: Initialize the scheduler interrupt on the boot CPU
procedure RPi3SchedulerStart(CPUID:LongWord);
Description: Initialize the scheduler interrupt on the specified secondary CPU
procedure RPi3SecondaryBoot(CPUID:LongWord);
Description: To be documented
RPi3 SWI functions
function RPi3DispatchSWI(CPUID:LongWord; Thread:TThreadHandle; Request:PSystemCallRequest):TThreadHandle;
Description: Process an SWI request
| Note | Called by ARMv8SoftwareInterruptHandler in PlatformARMv8
A DataMemoryBarrier is executed before and after calling this function |
|---|
RPi3 clock functions
procedure RPi3ClockInterrupt(Parameter:Pointer);
Description: Interrupt handler function for the clock interrupt
| Note | This schedules another clock interrupt to occur CLOCK_CYCLES_PER_TICK in the future, then updates ClockTicks and ClockSeconds and checks for timers to trigger. |
|---|
procedure RPi3ClockUpdate(Cycles:LongWord; var Last:LongWord);
Description: Setup a clock interrupt to trigger after the specified number of clock cycles
| Cycles | Number of cycles after which the timer interrupt is to be triggered |
|---|---|
| Note | This refers to native clock cycles as specified by CLOCK_FREQUENCY |
RPi3 scheduler functions
function RPi3SchedulerInterrupt(CPUID:LongWord; Thread:TThreadHandle; Parameter:Pointer):TThreadHandle;
Description: Interrupt handler function for the scheduler interrupt
| Note | This schedules another scheduler interrupt to occur SCHEDULER_CLOCKS_PER_INTERRUPT in the future, then checks for threads to wakeup or timeout and the next thread to schedule. |
|---|
procedure RPi3SchedulerUpdate(Cycles:LongWord; var Last:LongWord);
Description: Setup a scheduler interrupt to trigger after the specified number of clock cycles
| Cycles | Number of cycles after which the scheduler interrupt is to be triggered |
|---|---|
| Note | This refers to native clock cycles as specified by RPI3_GENERIC_TIMER_FREQUENCY |
procedure RPi3SchedulerSystemCall(Request:PSystemCallRequest);
Description: System Call handler for the scheduler
| Note | This is registered to receive requests for the SYSTEM_CALL_CONTEXT_SWITCH and will perform a context switch from within an SWI |
|---|
RPi3 framebuffer functions
function RPi3FramebufferDeviceAllocate(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Allocate a framebuffer using the Mailbox Property Tags
function RPi3FramebufferDeviceAllocateAlt(Framebuffer:PFramebufferDevice; Properties:PFramebufferProperties):LongWord;
Description: Allocate a framebuffer using a simple Mailbox Call
function RPi3FramebufferDeviceRelease(Framebuffer:PFramebufferDevice):LongWord;
Description: To be documented
function RPi3FramebufferDeviceBlank(Framebuffer:PFramebufferDevice; Blank:Boolean):LongWord;
Description: To be documented
function RPi3FramebufferDeviceCommit(Framebuffer:PFramebufferDevice; Address:PtrUInt; Size,Flags:LongWord):LongWord;
Description: To be documented
function RPi3FramebufferDeviceSetBacklight(Framebuffer:PFramebufferDevice; Brightness:LongWord):LongWord;
Description: To be documented
RPi3 helper functions
procedure RPi3Wait; assembler; nostackframe;
Description: To be documented
procedure RPi3LongWait; assembler; nostackframe;
Description: To be documented
procedure RPi3ShortWait; assembler; nostackframe;
Description: To be documented
procedure RPi3SlowBlink; assembler; nostackframe;
Description: To be documented
procedure RPi3FastBlink; assembler; nostackframe;
Description: To be documented
procedure RPi3BootBlink; assembler; nostackframe;
Description: Blink the Activity LED without dependency on any other RTL setup
procedure RPi3BootOutput(Value:LongWord);
Description: Output characters to UART0 without dependency on any other RTL setup
| Note | This function is primarily intended for testing QEMU boot because it doesn't initialize the UART and won't work on real hardware.
Based on hexstrings() function by dwelch67 (https://github.com/dwelch67) |
|---|
procedure RPi3BootConsoleStart;
Description: To be documented
procedure RPi3BootConsoleWrite(const Value:String);
Description: To be documented
procedure RPi3BootConsoleWriteEx(const Value:String; X,Y:LongWord);
Description: To be documented
function RPi3BootConsoleGetX:LongWord;
Description: To be documented
function RPi3BootConsoleGetY:LongWord;
Description: To be documented
function RPi3ConvertPowerIdRequest(PowerId:LongWord):LongWord;
Description: Convert Ultibo Power Id to BCM2837 Power Id
function RPi3ConvertPowerStateRequest(PowerState:LongWord):LongWord;
Description: Convert Ultibo Power State to BCM2837 Power State
function RPi3ConvertPowerStateResponse(PowerState:LongWord):LongWord;
Description: Convert BCM2837 Power State to Ultibo Power State
function RPi3ConvertClockIdRequest(ClockId:LongWord):LongWord;
Description: Convert Ultibo Clock Id to BCM2837 Clock Id
function RPi3ConvertClockStateRequest(ClockState:LongWord):LongWord;
Description: Convert Ultibo Clock State to BCM2837 Clock State
function RPi3ConvertClockStateResponse(ClockState:LongWord):LongWord;
Description: Convert BCM2837 Clock State to Ultibo Clock State
function RPi3ConvertVoltageIdRequest(VoltageId:LongWord):LongWord;
Description: Convert Ultibo Voltage Id to BCM2837 Voltage Id
function RPi3ConvertTemperatureIdRequest(TemperatureId:LongWord):LongWord;
Description: Convert Ultibo Temperature Id to BCM2837 Temperature Id
Return to Unit Reference